Two assumptions about the runner environment, both found by the Gitea
probe of #225 and both wrong on GitHub as well - they simply could not
show there.
CLUSTER NAME. Every leg created a cluster called "install-test". On
GitHub each matrix leg gets its own VM with its own Docker daemon, so
two legs never saw each other and the fixed name looked fine for two
years. Gitea runs all legs of a matrix CONCURRENTLY in ONE job on ONE
daemon, and there it collides immediately: one leg logs "Re-using
existing network 'k3d-install-test'", the other dies on "The container
name /k3d-install-test-server-0 is already in use", and then the first
leg's rollback deletes the shared network under the second. Two red
legs, and neither message names the cause. The cluster is now named
after the chart, in the create step and in the delete step - a blanket
cleanup would tear down the neighbour's cluster, which was the half of
the collision that turned one failure into two. ci/run-install-test.sh
never touches k3d, so nothing else had to move.
The bare chart name rather than a prefixed one, measured not assumed:
k3d v5.9.0 accepts a cluster name of 32 characters and rejects 33
("Cluster name must be <= 32 characters"), and the longest chart here is
calibre-web-automated at 21. "install-test-<chart>" would be 34 - it
would break that one chart and no other, which is worse than the fixed
name because it only sometimes breaks. A guard states the limit instead
of leaving it to be rediscovered.
KUBECTL. It was inherited from the runner image. The Gitea image has
none ("kubectl: command not found", 0 seconds into the chart install),
but that is how it was noticed, not why it is being changed: a client
version that arrives with the image drifts with every image rebuild, and
an install-test should run against a known one. GitHub's image carrying
one only makes the drift invisible there. Pinned to v1.35.5 to match the
K3S_IMAGE it talks to, tracked by Renovate the same way TRIVY_VERSION
is, and guarded against skew: kubectl supports one minor away from the
server, Renovate moves KUBECTL_VERSION on its own, and K3S_IMAGE is
tracked by nothing. Dry run proves both directions - the rule extracts
(kubernetes/kubernetes, github-releases) and it fires (from v1.34.0 the
lookup offers v1.37.0, minor). That same measurement shows the guard is
not theoretical: Renovate jumps several minors in one PR, so it will go
red on purpose, naming which pin to move.
A measurement overtook this part of the change. A shared `jlab-renovate-bot`
instance already runs on the Gitea side and already has this repository
enrolled - its first run there opened PRs for searxng and gotenberg plus the
dependency dashboard. A second runner in this repo would produce duplicate
PRs and two schedulers rewriting each other's branches, so
.github/workflows/renovate.yml is removed again.
Two things fall out of that run, and both were open risks:
- The instance reads our renovate.json5. searxng and gotenberg are
customManagers targets of ours - no built-in manager finds an appVersion
in a Chart.yaml - so the config is demonstrably in effect.
- allowedCommands is already granted there. The searxng PR's diff carries
`version: 1.0.4+up2026.9.11.ffe96f8a6 -> 1.0.5+up2026.9.13.96479fff6`
next to the appVersion, and nothing but ci/renovate-bump-chart.sh writes
`version:`. Had that allow-list been missing, postUpgradeTasks would have
been skipped SILENTLY and every chart PR on Gitea would have been red on
the version check with nothing naming the cause.
With the workflow gone there is no container image to pin either; verified
by dry run that the ghcr.io/renovatebot/renovate dependency is no longer
extracted, while TRIVY_VERSION still is - that one belongs to the Trivy
replacement and stays.
README and CLAUDE.md now say Renovate runs on Gitea as an existing shared
instance and that no workflow belongs here, so the next reader who finds
none knows why instead of building one.
Groundwork for #225, built on a throwaway pull request against the Gitea
instance rather than on assumptions. The move itself is not part of this
change - no Actions are switched off, no mirror is enabled, no branch
protection is touched.
What the probe run measured, and what follows from it:
- Which jobs need a Docker socket: only the install-test. Measured per
job - detect-changed-charts, build-chart, the quantity render and the
Trivy config scan all pass on `ubuntu-latest`, which on that instance
has no socket. The install-test dies there at "Create k3d cluster"
with "Cannot connect to the Docker daemon", an error naming k3d and
never the runner label. Its `runs-on` is now an expression: the label
`ubuntu-docker` on Gitea, `ubuntu-latest` on GitHub, because the
former does not exist there and a chart PR would otherwise queue
forever during the handover. Gitea evaluates it - the probe job was
taken by the docker runner.
- The install-test still cannot pass on Gitea. That daemon is rootless
with "Cgroup Driver: none"; the k3s node restarts immediately with an
empty log because k3s needs cgroup delegation. The label is necessary
and not sufficient, and the fix is the maintainer's.
- aquasecurity/setup-trivy cannot be used on Gitea: it checks out
aquasecurity/trivy from github.com with `github.token`, which there is
a Gitea token, and ends on "could not read Username for
https://github.com". Replaced by the release tarball - one request,
same behaviour on both forges, green on the probe run.
Also in this change:
- .github/workflows/renovate.yml, Renovate in self-operation: a daily
scheduled run in the official container, inert on github.com via a
`github.server_url` guard. Every rule proved by dry run instead of
assumed - the pinned Renovate image is tracked by the built-in
github-actions manager (44.80.0 -> 44.87.1, minor), TRIVY_VERSION is
still tracked after setup-trivy is gone (v0.72.0 -> v0.74.0, minor),
and `ubuntu-docker` is not extracted by the github-runners manager at
all, so nothing will quietly "correct" it.
- ci/migrate-issues-to-gitea.sh, runnable, with --dry-run, and NOT run.
Its header names what it cannot do: comment authorship, the #<n>
references between issues, and attachments.
- CLAUDE.md and README.md on the new flow: which forge and which tool,
auto-merge on green checks in place of the merge queue Gitea does not
have, and the measured differences of the two CIs.
Refs #225 - deliberately no "Fixes": the move is not finished with this.
A chart in ci/excluded-charts.txt got an install-test job that ran the script, printed SKIP and exited 0. GitHub knows only the exit code, so the check list showed "Install-test satisfactory OK" for a chart whose image was never pulled - indistinguishable from one that really came up in the cluster (#231). detect-changed-charts now removes those charts before the matrix is built, so no job exists for them and nothing claims they passed.
An absence says nothing by itself, so the detect job writes every excluded chart of the PR with its documented justification into the job summary. A "Skipped" would only say "not run"; the reason is the question a review actually asks.
The list is not parsed in YAML. The workflow calls ci/run-install-test.sh --list-excluded, the one parser, and compares whole strings with jq, so a chart name is never read as a pattern. The script's own exclusion branch now goes through the same excluded_reason() helper instead of a grep that used the chart name as a regex; it stays for local runs, where the CI filter does not apply.
Not viable, and recorded at the matrix as a comment: deciding per chart in an "if" on the install-test job, which would give a visible Skipped entry instead of an absent one. GitHub rejects it - jobs.<id>.if is evaluated before the matrix is expanded, so the matrix context does not exist there ("context \"matrix\" is not allowed here. available contexts are \"github\", \"inputs\", \"needs\", \"vars\"."). Run 33650724109 on the closed PR #233 ended in failure with zero jobs created.
The publish step no longer speaks OCI. "helm registry login", "helm push"
and "helm registry logout" are replaced by a single HTTP POST of the
packaged .tgz to <charts-url>/api/charts, with Basic auth per request.
Credentials and the target URL come from a new 1Password item
op://GitHub-Actions/jlab-registry-access (username, password, charts-url).
The old item is left untouched, so a revert of this commit restores the
previous pipeline without any further work. No registry address enters
the repository.
The three properties of the old step survive:
- values are read via steps.<id>.outputs.* into the step's own env block
and used as quoted shell variables, each guarded with ":?"
- credentials stay out of argv: "curl --config -" instead of "--user"
- a failed upload fails the job: "--fail-with-body", because curl exits 0
on HTTP 401/403/409 without it and the publish would go green with
nothing uploaded
The "<chart>-*.tgz" glob is replaced by the file name built from the
chart name and the version already read from Chart.yaml; --upload-file
takes exactly one file. Two small additions fall out of measuring the
new step: the registry host is masked, because a curl connection error
prints only "<host>:<port>" and the mask on the full URL does not cover
that, and whitespace in the credentials is rejected up front, because an
unquoted curl config value ends at the first space.
No chart is touched and no chart version is bumped.
Deploys matszwe02/ytdlp_web_player, a Flask app that fetches videos with
yt-dlp, transcodes them with ffmpeg and serves them as HLS. It ships no
authentication of any kind, so the chart carries a preconfigured oauth2-proxy
as an optional subchart, in the data path in front of the app.
This is the first chart in the repo with a dependency, so the rule "charts
have no dependencies" falls here. It is replaced in CLAUDE.md and README.md by
a bar: a dependency has to be optional and off by default, upstream's chart is
consumed as it comes (documented where it falls short of our conventions,
never patched), and the price is written down - above all that a subchart is
invisible to everything downstream watching Helm release versions, so a new
proxy release only reaches a cluster when this chart is republished.
CI learns the dependency in five places, not the three the plan expected:
helm lint, package, template and install all exit 1 while charts/ is unfilled,
so ci/helm-dependencies.sh runs before lint and package in validate-charts.yml,
before package in publish-helm-chart.yml, and inside run-install-test.sh,
run-trivy-config.sh and run-quantity-render-test.sh - the last of which renders
every chart on every PR and would have gone red first.
Notable chart decisions, each measured rather than assumed:
- The image has no USER and runs as root by default, but not by necessity: it
runs under an arbitrary uid with readOnlyRootFilesystem and the full
hardening baseline. Only the pinned uid is a deviation, and it is documented.
- Two emptyDirs, each justified separately. /data holds the video cache
(DATA_PATH). /tmp is NOT mounted - measured across metadata extraction, HLS
transcoding, sprite generation and audio extraction, the image never writes
there. What it does write is $HOME/.cache, so /cache is mounted with HOME and
XDG_CACHE_HOME pointed at it; without it yt-dlp re-downloads its JavaScript
challenge-solver from github.com on every extraction.
- The proxy is wired through config.configFile, the only value the subchart
passes through tpl - config.upstreams is emitted with toJson and would carry
a literal {{ .Release.Name }} into the manifest.
- Rendering aborts when this chart's Ingress and the proxy's claim the same
host: ingress-nginx rejects the second one and a Fleet bundle then sits in
ErrApplied until forceSyncGeneration is bumped.
Fixes#214
Adds ci/run-quantity-render-test.sh and a validate-charts job that runs it
over every chart on every PR.
The bug behind #157 has a loud and a silent half. Loud: a bare integer request
of 1048576 is reformatted by printf "%v" to "1.048576e+06", the helper rejects
the suffix it produced itself and the render aborts. Silent: with a fractional
limitFactor the *product* is reformatted after the suffix check, the render
succeeds, and the manifest carries memory: "1.4999985e+06" - rejected by
nothing until the API server sees it at apply time.
So the test renders each chart twice and, for the silent case, searches the
rendered text rather than the exit code. It runs over all charts, not the
changed ones: the resources helper is copied into every chart's _helpers.tpl,
so the regression arrives by copy, in a PR whose diff shows a new chart and not
the bug inside it. The resources paths come from values.schema.json (JSON, so
python3 reads it without pyyaml), which also means a new chart is enrolled
automatically and there is no list to maintain.
Charts that pin every computable limit in their fallback defaults never reach
the helper (gotenberg, rss-bridge). They are reported as "not exercised"
instead of counted as passing.
BentoPDF computes entirely in the visitor's browser; the container only serves
static files through nginx. The chart is therefore close to cyberchef - same
nginx-unprivileged base, uid 101, port 8080, probes on "/" - with four
differences that shaped the design.
Runtime config.json. The one setting reachable at runtime is the tool list.
It is a static file in the middle of the web root, so it is mounted by
subPath: a directory mount would hide the whole application. subPath mounts
are never refreshed by the kubelet, which makes the checksum/config annotation
(#82) load-bearing rather than decorative. bentopdf.config is passed through
verbatim, like searxng's settings, so a key upstream adds tomorrow is a values
change and not a chart change.
Three env switches that would kill the pod. PORT, DISABLE_IPV6 and
ROBOTS_NOINDEX are implemented as "sed -i" against files in the image, run
under "set -e" in /docker-entrypoint.d/, and the base image's entrypoint
aborts when one of them fails. With readOnlyRootFilesystem: true the pod
therefore never starts instead of ignoring the switch - measured in k3d as
CrashLoopBackOff, exit 1, "sed: can't create temp file
'/etc/nginx/nginx.confXXXXXX': Read-only file system". None of the three is
offered as a first-class value; values.yaml names the failure picture and the
escape hatch (env block plus readOnlyRootFilesystem: false).
Writable paths were measured, not copied from the upstream chart.
/etc/nginx/tmp holds the pid file and /var/cache/nginx is where nginx creates
its temp directories at startup - without it the master aborts with
'mkdir() "/var/cache/nginx/client_temp" failed'. /var/run is deliberately not
mounted: the running pod proves it is unnecessary.
Everything else about BentoPDF is a build-time argument and out of reach for
any chart; values.yaml says so explicitly rather than leaving it to be
discovered. Two accepted consequences are named there too: some tools fetch
WASM modules from a public CDN at runtime, and the served pages carry a
canonical link to the vendor's site.
Fixes#174
SearXNG as a stateless Deployment plus a settings ConfigMap, with the four CI
steps a new chart needs: publish workflow, change-app-version choice list,
ci/searxng/ fixtures and a renovate.json5 block.
Three points where the chart is not a cyberchef with another name:
* The image entrypoint writes settings.yml into /etc/searxng only when the
file is missing. The chart always mounts one by subPath, so the copy and
the random-secret sed never run and the container needs no write access
there - which is what allows readOnlyRootFilesystem: true.
* The signing key is a required OnePasswordItem, not a ConfigMap key. It
signs the settings cookie and the image-proxy URLs, and the entrypoint's
self-generating fallback cannot fire here, so without it the instance would
run on the literal "ultrasecretkey" - which webapp.py refuses with exit 1.
* All three probes use /healthz, the only path the bot detection lets through
unconditionally. Measured: with the limiter active, "/" answers 429 while
/healthz still answers 200.
ingress.domain is read a second time outside the Ingress template, for
SEARXNG_BASE_URL, and carries its own required() there - so it stays
mandatory with the Ingress switched off.
The Renovate versioning regex deviates from the plan on the issue and matches
the commit hash WITHOUT capturing it. Renovate parses a "build" group with
Number.parseInt, so a hash becomes the digits leading it; measured on
renovate 41.173.1 and 44.48.0, the planned form reports an image pushed
earlier the same day as an update to a newer one. Reasoning in the block and
in README.
freesailarr was excluded from the install-test because gluetun never becomes
healthy without a real Wireguard key and no app container behind its kill
switch can become Ready. The green "Install-test freesailarr pass" was a
25-second SKIP on the most complex chart in the repo - a signal that proved
nothing.
With a CI-only Mullvad key in 1Password the reason is gone:
- ci/run-install-test.sh learns a general rule: ci/<chart>/fixtures.env.yaml is
rendered with envsubst before it is applied, restricted to the variable names
a chart declares in REQUIRED_ENV. A missing or empty declared variable fails
the run loudly and names the variable - it never skips the chart.
- The install-test job loads the key from 1Password Connect for freesailarr
only, following the pattern publish-helm-chart.yml documents: values via
steps.<id>.outputs.*, mapped into the step's own env, quoted, with ":?"
guards that name the missing op:// field before a cluster is created.
- Fixtures for freesailarr: three media claims, the gluetun secret template
with variable names only, firewallOutboundSubnets so the kill switch does not
block cluster DNS, and INSTALL_TIMEOUT=900 for nine containers.
freesailarr/Chart.yaml goes 3.0.0+up1.0.0 -> 3.0.1+up1.0.0. That bump is
deliberately empty of content: the install-test matrix follows changed chart
directories, and without it this PR could not run the test it adds.
The chart bundles nine independently versioned upstreams, and eight of them
were already pinned in values.yaml while only gluetun took its tag from
appVersion. That split had no upside: it made gluetun the one image Renovate
could not reach through the built-in helm-values manager, and it implied a
"main app" the stack does not have.
gluetun now carries gluetun.image.repository/tag like every other image, and
the StatefulSet renders it from there. No tag comes from appVersion any more.
Renovate picks all nine up through helm-values - the manager the repo already
relies on for sidecar images - and ci/renovate-bump-chart.sh bumps the chart
version with each update.
Consequences, all documented where they bite:
- renovate.json5 deliberately gets no app-version block for this chart. One
would either duplicate the helm-values updates or rewrite an appVersion that
selects no image. The absence is commented so it does not read as an
oversight.
- freesailarr leaves the change-app-version.yml choice list. That workflow
rewrites appVersion and republishes, which for this chart would change no
deployed image at all.
- appVersion becomes a hand-maintained marker for the gluetun line. Since
renovate-bump-chart.sh bumps the patch level on an unchanged appVersion, a
gluetun update has to be paired with a hand edit of appVersion, or the +up
suffix stops describing what the chart deploys. Noted in Chart.yaml,
values.yaml and README.
Two defects kept the publish broken after the load-secrets-action v5 bump
in #140.
v5 no longer exports the loaded values as environment variables for later
steps the way v4 did; only the step outputs carry them. Every
"${{ env.JK_CR_* }}" reference therefore resolved to an empty string from
that bump on, and nothing reported it - the loading step logs "Populating
variable" and stays green either way. #149 moved three of the four
references to steps.<id>.outputs but left "-u ${{ env.JK_CR_USERNAME }}"
on the old form, and piped the username instead of the token into
--password-stdin.
The second defect is why this surfaced as a terminal error: an empty value
collapsed into a missing argument instead of failing. With an empty
username, "-u" swallowed the following "--password-stdin", helm stopped
reading the password from stdin, prompted interactively and died with
"inappropriate ioctl for device".
All four values now come from steps.<id>.outputs, are mapped into each
step's own env block and used as quoted shell variables guarded with ":?".
An empty or unset value aborts the job naming the op:// path to fix,
quoting keeps it from shifting arguments, and the token no longer appears
on the command line.
The two open Renovate PRs (#138 alpine 3.22 -> 3.24, #139 nginx 1.30.4 ->
1.31.4) never automerged because both are minor updates while the rule
only covered patch and digest. Sidecar images barely move in patch steps,
so patch-only would practically never fire.
Automerging a chart update publishes it, so the install-test can no
longer report failures without blocking: continue-on-error is gone and
issue #22's stabilization phase ends here. Majors stay manual.
Renovate only ever rewrites appVersion or an image tag, so every PR it
opened against a chart directory failed the build-chart version check
(#138, #139). ci/renovate-bump-chart.sh recomputes
version: <semver>+up<appVersion> as a postUpgradeTasks hook: chart major
when the app major moves, chart patch otherwise.
Each chart renders its main image as <repo>:{{ .Chart.AppVersion }}, so
repository and version live in different files and Renovate cannot join
them. The mapping is one customManager per chart in renovate.json5,
deliberately not a comment inside each Chart.yaml - that would touch all
20 chart directories and force 20 publishes for a comment change.
Patch and digest updates automerge after a 3-day minimumReleaseAge once
the pipeline is green; majors arrive one line at a time to match the
stepwise app-major procedure. ci/** stays excluded: the install-test
fixtures pin throwaway infrastructure to major lines on purpose.
Takes over the four loose manifests in cluster-config/rss-bridge/ as a
proper chart, on the current template-chart standard: strict values
schema, null-safe helpers, computed limits, replicas/scaleDown,
checksum/config, NOTES.txt.
Two things deviate from the repo standard on purpose:
- The Ingress models host AND TLS secret name per entry instead of the
single conventional tls-<release>-<chart>-ingress. The installation
this replaces has grown three separate certificates, one per host.
Renaming them would make cert-manager issue three new ones and leave
each host unreachable until it did - a self-inflicted outage on a
deployment that has been up for over a year. Entries sharing a secret
name are grouped into one tls entry, and omitting the name falls back
to the convention, so consolidating later is a values change.
- Requests and limits are decoupled. The old manifest requested 2Gi of
ephemeral storage, identical to its limit, reserving two gigabytes for
a workload measured at 2.2 MB after fetching all five whitelisted
bridges. The request drops to 64Mi; the limit stays at 2Gi.
Hardening was verified rather than assumed. The image ships no USER and
runs as root by default, but runs fully hardened once its writable paths
are provided: uid/gid 33, readOnlyRootFilesystem, all capabilities
dropped, seccompProfile RuntimeDefault. The writable paths were found by
running the image with a writable rootfs, exercising every bridge and
reading its diff layer - /app/cache, /run, /run/php, /var/lib/nginx.
/tmp did not show up that way, because PHP's opcache creates its lock
file there and unlinks it immediately; it only surfaced when the
hardened container died at startup. Stopping at the first writable path
would have shipped a chart that cannot start.
Probes use the app's own /?action=health, which renders fixed JSON
without touching the cache or any remote site, so neither a scraped site
going down nor an unwritable cache can restart the pod.
Fixes#128
Adds a trivy-config job to the PR pipeline that renders each changed chart
with Helm and runs `trivy config` over the rendered manifests. Reporting
only - TRIVY_CONFIG_MODE=report always exits 0, so the job never blocks a PR.
Rendered manifests rather than the chart directory: `trivy config <chart-dir>`
renders with default values, which fails on every chart here because of their
required() values - and Trivy does not fail with it, it logs "Skipping chart"
and prints an empty, green report.
Values come from the install-test fixtures (ci/<chart>/test-values.yaml), the
only committed per-chart values in the repo; none of them touches
securityContext, images or capabilities, so the scan sees the chart's own
hardening. Charts without fixtures get ci/trivy/values/<chart>.yaml.
Exceptions live in ci/trivy/trivyignore.yaml in Trivy's native ignore-file
schema, each with a statement - the script refuses to run without one and
reports suppressed findings with their reason instead of hiding them.
AVD-KSV-0125 is configured instead of excepted: ci/trivy/data/ksv0125.yaml
lists the trusted registries, so the check stays able to flag a genuinely
foreign source.
Refs #84.
Imports the chart from cluster-config functionally unchanged, wires it into
the publish/validate/install-test pipelines and publishes it as the first of
three Java lines (0.4.0+upjava8).
The only deviation from the source chart is the chart-global scaleDown flag
plus a server.replicas value, following the satisfactory pattern: two of the
three servers stand at 0 replicas in the cluster, which the chart could not
express, and Fleet would otherwise start them on reconcile. The default
(scaleDown: false) still renders replicas: 1, so the rendering of the running
server is unchanged - verified byte-identical against the three real values
files for all three Java lines.
Known deficiencies (hardening, probes, naming scheme, hardcoded values,
missing icon, the misleading mc-router auto-discovery annotations) are left
untouched on purpose and are scheduled for stage 2.
Takes the existing mc-router chart over from cluster-config as-is so the
deployment can move to Fleet without any change to the rolled-out state.
Convention alignment follows in stage 2, the app update in stage 3.
The only deviation from "unchanged": Chart.yaml carried name:
minecraft-server (copy-paste from the sister chart). The publish job pushes
by the glob <directory>-*.tgz while helm package names the archive after the
Chart.yaml name, so without this correction the push finds no file.
Version 0.1.1+up1.25.1 - chart semver stays at 0.1.1, the +up suffix is repo
policy and does not affect rendering.
Also wires up CI: publish workflow, change-app-version choice list,
install-test values (CI-only node-port override, since 25565 is outside the
k3d default range) and the README chart table.
New install-test job in validate-charts.yml: for exactly the charts a PR
changes, install them into an ephemeral k3d cluster (pinned k3d v5.9.0,
k3s v1.35.5-k3s1) and require every Deployment/StatefulSet to become
Ready. Runs non-blocking (continue-on-error) during the stabilization
phase.
Fixtures live at the repo root under ci/ (not inside chart directories,
so they neither trigger publishes on merge nor get packaged): a stub
OnePasswordItem CRD, per-chart test values and fixtures (dummy secrets
with in-cluster DSNs, throwaway postgres/redis/dex, synapse-generate
seed job, static hostPath PVs where charts pin storage classes or need
RWX), plus a shared ci/run-install-test.sh harness that also runs
locally.
Excluded with documented reasons (ci/excluded-charts.txt): satisfactory
(multi-GB image), teamspeak-server (TS6 beta license expired, image
crashes on start), template-chart (placeholder image).
All 14 non-excluded charts verified locally in k3d using only the
committed fixtures.
On every pull request, detect which chart directories were touched and
run helm lint --strict, helm package, and a chart-version bump check
for exactly those charts. PRs without chart changes skip the build.
Fixes#5
The chart is no longer needed. Removes the chart directory, its publish
workflow, and its row in the README chart table. Already published
versions remain in the registry.
Fixes#7
Without a branch filter, any push on any branch touching a chart
directory packaged and published the chart to the registry.
Fixes#4
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
jklein
jlab-renovate[bot]