Wiki Page Revisions
5 Commits
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jklein
|
81980279c4
|
NetworkPolicies in every chart (Gitea #5): the convention, the gate, and what it does not do
29 chart pages plus Chart-Style-Guide, CI-CD, Charts and Lessons-Learned. Chart-Style-Guide gains section 15, and its core is the FOUR PORT CLASSES - the part that is actually hard to get right. A port a network probe addresses stays open until probeSources is set, because the kubelet probes from the worker node's IP and no chart can know it. A NodePort-published port stays open because the source is already masqueraded. Everything else can be and is restricted by source, which is why the charts with a real inbound restriction are exactly those whose probes use a different port. A replica-to-replica bus gets a bare podSelector - and, since policyTypes lists Egress, its outbound side needs a rule of its own or the cluster never forms while every node looks healthy. The exec-probe distinction is written down as load-bearing rather than pedantic: it is the whole reason valkey and minecraft-server are the tightest policies in the repository and every HTTP-probed web app is looser. CI-CD gains the networkpolicy job as section 8 (the later two renumbered), and it ends with the measurement rather than a claim. Two experiments ran on the PR and were reverted: cyberchef's probe port restricted to an address no probe can come from stayed GREEN at 1m9s, and outline with its DNS egress rule removed went RED at 5m59s. Together those say k3s exempts the kubelet's probe traffic while enforcing everything else - so the install-test's net is an EGRESS net, and a wrong ingress port is caught by the render assertion or not at all. Every chart page gets a networkPolicy values table and an operating note naming that chart's own trap, not a boilerplate one: - keycloak carries the blast radius: it is the cluster's identity provider, its http rule is the only source-restricted inbound rule in the repo, and nothing in CI can catch a wrong controller - so the page asks for a real login and a look at consumers' issuer URLs after the first upgrade. - garage asks the reader to check their S3 consumers, because anything in another namespace is blocked until it is in allowedNamespaces. - bulwark names the quietest failure in the sweep: its probes test its own port, so a jmapServerUrl on a blocked port yields a Ready pod serving an empty webmail. - gotenberg explains what its DNS-only cap COSTS - HTML conversion silently loses remote assets - rather than only what it buys. - satisfactory and homeassistant each argue their own Ingress-only policy; satisfactory's deciding half is that it is the one chart with no install-test at all, so an egress cap there would be the only one with no empirical check behind it. - paperless-ngx names the two pods of its release that the object does NOT cover, including the consume CronJob whose pod template carries no labels. - freesailarr explains why ten containers behind a VPN need only three egress rules, and that extraPorts cannot help with an alternative WireGuard port because it is TCP-only. valkey and stalwart are corrected rather than extended. valkey's page now says why having no probeSources is what makes it the tightest policy here and not an incomplete one. stalwart's carries a dated correction: this page and the chart both advised putting the ingress controller's namespace into allowedNamespaces with ["ingress-nginx"] as the example, and both halves are wrong - ingress-nginx is gone from the cluster entirely, and allowedNamespaces would have opened http to every pod in that namespace anyway. Charts drops the claim that valkey is "the first chart with a NetworkPolicy on by default" and says instead that every chart has one, with the two shapes a reader needs before opening any chart page. Lessons-Learned gains four, all transferable: - the net that existed for a different failure than the one it was built for, and why both experiments were needed before either could be read; - a comment that could not describe its own syntax (a template comment must not spell out its own closing delimiter; the render then fails pointing at the template, not at the sentence); - three values that reached no rule and would have read as controls - a convention about value NAMES is not a convention about which values exist; - the subchart whose comments the parent could not fix, and the rule it produced: before making a check a gate, ask which failures the author of this diff can actually fix. |
||
|
jklein
|
353fb7d6de
|
Gateway-API mode for group 2 of #114: the five annotation charts
PR #117. calibre-web-automated, outline, paperless-ngx, zipline (proxy-body-size) and freesailarr (rewrite-target) each gain an httpRoute block, off by default. Per chart page: a Routing row instead of the Ingress row, a Gateway-mode install snippet, an httpRoute values table, and a "Routing: Ingress or Gateway API" operating note. The upload-limit disclosure is written in each chart's own terms rather than copied: an e-book library (calibre), an upload service (zipline), the web-UI half while the consume directory keeps no limit (paperless), and the open #12 pair (outline). freesailarr sets no body-size annotation and needs none, but ingress.annotations is its operator's only lever for one. outline: #12 now says what Gateway mode does to it. The ingress half of the pair disappears, so the effective ceiling is the Gateway's and neither documented number necessarily decides. That moves the defect; it does not fix it. paperless-ngx: it was the last chart rendering its Ingress unconditionally and now has ingress.enabled, default true. Recorded with the reason, because the page previously stated the absence of that switch as a property. freesailarr: the page gains the finding and the improvement. Its shared-host app list was gated on ingress.enabled and also feeds the <APP>__SERVER__URLBASE variables, so Gateway mode would have served radarr/sonarr/prowlarr under their prefixes with no base path set - broken UI, Ready pod. And its rewrite-target crutch is gone: a URLRewrite filter is per rule, so qBittorrent needs no second routing object, no repeated TLS secret, no conditional cert-manager annotation and no regex path. Chart-Style-Guide §4: the "needs one, not sets one" screen, the rewrite-target asymmetry as the one place this mode is less machinery, the ingress.enabled-first rule for a chart without that switch, the freesailarr hostnames exception, and the group status. §12.1 gains the two addenda the sweep produced. CI-CD: the HTTPRoute test figure (4 over 2 at the pilot, 20 over 10 after group 1, 36 over 15 now), the multi-app overlay rule, and the honest note that the Gateway branch of NOTES.txt is executed by that test but printed by no stage. Lessons-Learned: the freesailarr case in full, next to sure's. Same helper shape, different symptom - which is the point: ingress.enabled is almost never asked "does an Ingress exist", and the property it stands in for does not flip with the object. |
||
|
jklein
|
311293e164
|
chart pages carry no version numbers any more
Both version rows leave every chart page's at-a-glance table; the image repository stays, because it does not rot. A plain app-version bump obliges no wiki edit — that rule is deliberate and stays — so any number written here is stale within a Renovate round, as urlaubsverwaltung's already was. Chart.yaml is where the pair is read, exactly as the chart index has said from the start. Home and Workflow no longer promise version snapshots. Forge and tooling described remotes named github and JLab-Git; the checkout has exactly one, origin, pointing at Gitea. Workflow gains the rule the wiki never had: fetch and rebase before every push, never force-push. |
||
|
jklein
|
d19d0bd89f
|
required() for the four mandatory OnePasswordItem references (#18)
Chart pages: calibre-web-automated 7.0.0, minecraft-server 6.0.0 and urlaubsverwaltung 10.0.0 now guard their secret references, so the values tables no longer say "not guarded by a required in the template". searxng 1.0.6 is a version snapshot only - its valkey reference was already correctly optional and stays that way. Style guide 12: the bullet on how null reaches the schema was wrong in the case it was being applied to. A null chart default is NOT coalesced away; only a user null over a non-null default is. Added the rule that follows from it - a value with no valid default cannot be enforced by values-schema at all while helm lint --strict has to pass on the defaults, so required() is the whole enforcement and a required array would be a guard that cannot fire. Lessons learned: both halves of that, since a safeguard that looks like one and never fires is the same failure shape as the missing guard it replaced. |
||
|
jklein
|
f62f2e5871
|
Fill the wiki as the repository's knowledge base
One page per chart - prerequisites, installation walkthrough, the required 1Password fields, the complete values reference and the chart's operating traps - plus the long form of the workflow, the forge and its measured differences, the pipelines, versioning, Renovate, the chart style guide, the procedure for a new chart, local development, and the incidents each rule was bought with. Chart pages quote versions as snapshots; Chart.yaml stays authoritative, because Renovate moves app versions continuously and never edits the wiki. |