helm-charts/ci/run-selector-match-test.sh

#!/usr/bin/env bash
# Selector-match render test: every label selector a chart renders is held
# against the labels of the pod templates in the SAME render.
#
# Usage: ci/run-selector-match-test.sh [chart ...]   (no argument = all charts)
#
# WHAT IT GUARDS AGAINST, AND WHY A GREEN ROLLOUT DOES NOT (Gitea #96)
#
# Two kinds of object in this repository select pods by label, and BOTH of them
# fail silently when the selector matches nothing:
#
#   topologySpreadConstraints - a constraint whose labelSelector matches no pod
#     is TRIVIALLY SATISFIED. It is a condition over zero pods, so every
#     placement meets it: nothing is distributed, the rollout is green, no event
#     is emitted and no log line appears. With whenUnsatisfiable: DoNotSchedule
#     this is worse rather than better, because the object then reads like a
#     guarantee that two replicas sit on different nodes.
#   PodDisruptionBudget - a budget whose selector matches no pod does its
#     arithmetic over zero pods and never blocks an eviction. `kubectl drain`
#     takes the whole group at once while the object sits in the namespace
#     looking like protection.
#
# Neither is a render error, neither is an install-test failure, and neither is
# visible in a diff: the chart that breaks it is usually a chart that RENAMED a
# label somewhere else. Charts keep their selector and their pod labels in one
# helper for that reason (stalwart.groupLabels, keycloak's app label) - but one
# definition only helps while nobody writes a second one, and that is the part a
# test can hold.
#
# Over ALL charts and not the changed ones, for the same reason as
# ci/run-quantity-render-test.sh: the mistake arrives by copy into a new chart,
# whose own diff nobody reads for it, and running over everything means there is
# no list to maintain - adding a chart enrols it.
#
# HOW THE YAML IS PARSED, AND WHY NOT WITH A PARSER WRITTEN HERE
#
# The runners have neither pyyaml nor yq - measured, the same constraint
# ci/run-trivy-config.sh and ci/run-quantity-render-test.sh work under. Writing
# a YAML reader in awk or sed was the obvious alternative and is the wrong one:
# its failure mode is a parser that quietly reads nothing, finds no selector,
# reports no mismatch, and leaves this test green for a chart it never looked
# at - the exact class of signal this repository removes rather than adds.
#
# So HELM is the parser, which is a YAML implementation that is already
# installed, already trusted, and already the one that produced the manifests.
# ci/yaml2json is a one-template chart that prints its values back as JSON; the
# rendered manifest stream is handed to it as a VALUES FILE and comes back as
# JSON that python3 reads with its standard library. What IS done textually is
# only the document split, on a line that is exactly "---" in column one, and
# the consequence of getting that wrong is not a false pass: the fragment stops
# being valid YAML and helm exits 1.
#
# WHAT IS DELIBERATELY NOT CHECKED
#
#   - preferred podAffinity and podAntiAffinity of either strength. They carry
#     labelSelectors too, but their semantics are "relative to pods that exist",
#     and a term matching nothing is a legitimate configuration rather than a
#     mistake: a preference that cannot be met is dropped and an anti-affinity
#     over zero pods is satisfied. Out of scope, and named so that the gap is
#     not mistaken for coverage.
#
#     requiredDuringSchedulingIgnoredDuringExecution podAffinity is NOT in that
#     gap and is checked (Gitea #101). Its failure is not a preference quietly
#     dropped: a required term whose selector matches no pod in the release can
#     never be satisfied, so the pod stays Pending forever. For the workload
#     that introduced one here - paperless-ngx' consume CronJob, pinned onto the
#     node of its StatefulSet pod so that Longhorn will mount the shared RWX
#     volume - that would mean a mover that silently stops moving, with one
#     Pending pod per schedule and a green render behind it. The term names a
#     label written in ANOTHER template, which is the copy this test holds.
#   - selectors expressed ONLY through matchExpressions. Evaluating a set-based
#     requirement means reimplementing label-selector semantics, which is a
#     second parser by another name. Those are REPORTED as "not checked" and
#     are never counted as passing, because a green tick for a code path nobody
#     entered is worse than an honest gap (README, "Two rules for every check
#     added here").
#
# AND THE ANTI-VACUUM GUARDS, because this test can be green over nothing. A
# chart renders a PDB or a spread constraint only above a replica threshold, and
# every chart's CI fixtures sit below it. Two rules therefore apply:
#
#   1. ci/selector-match/<chart>.yaml is an overlay applied last, whose only job
#      is to push a chart over that threshold. A chart that HAS one and still
#      renders no selector FAILS - the overlay exists for exactly that, so an
#      overlay that stopped working is a finding and not a shrug.
#   2. If no selector at all was checked across the whole run, the run fails.
set -euo pipefail

ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
CI_DIR="$ROOT/ci"
YAML2JSON="$CI_DIR/yaml2json"
OVERLAY_DIR="$CI_DIR/selector-match"
RELEASE="selector"

WORK="$(mktemp -d)"
trap 'rm -rf "$WORK"' EXIT

# --- Which charts -----------------------------------------------------------
CHARTS=()
if [ "$#" -gt 0 ]; then
  CHARTS=("$@")
else
  for DIR in "$ROOT"/*/; do
    [ -f "$DIR/Chart.yaml" ] || continue
    CHARTS+=("$(basename "$DIR")")
  done
fi
if [ "${#CHARTS[@]}" -eq 0 ]; then
  echo "ERROR: no chart directories found under $ROOT" >&2
  exit 1
fi

FAILED=""
CHECKED=""
NOT_EXERCISED=""
WITH_GAPS=""
TOTAL_SELECTORS=0
SUMMARY_ROWS=""

for CHART in "${CHARTS[@]}"; do
  if [ ! -f "$ROOT/$CHART/Chart.yaml" ]; then
    echo "ERROR: '$CHART' is not a chart directory" >&2
    exit 1
  fi

  # Same reason as in ci/run-quantity-render-test.sh: a chart with a declared
  # dependency cannot be rendered at all while charts/ is empty, and this job
  # runs over EVERY chart on EVERY pull request - so without this line a PR
  # touching nothing but a README would go red on the charts that have one.
  "$ROOT/ci/helm-dependencies.sh" "$ROOT/$CHART"

  # Values: the same precedence the other render tests use, so a chart's CI
  # values are maintained in one place and satisfy its required() values.
  VALUES_ARGS=()
  VALUES_LABEL="chart defaults"
  if [ -f "$CI_DIR/$CHART/test-values.yaml" ]; then
    VALUES_ARGS=(-f "$CI_DIR/$CHART/test-values.yaml")
    VALUES_LABEL="ci/$CHART/test-values.yaml"
  elif [ -f "$CI_DIR/trivy/values/$CHART.yaml" ]; then
    VALUES_ARGS=(-f "$CI_DIR/trivy/values/$CHART.yaml")
    VALUES_LABEL="ci/trivy/values/$CHART.yaml"
  fi
  HAS_OVERLAY=""
  if [ -f "$OVERLAY_DIR/$CHART.yaml" ]; then
    # Last, so it wins over the install-test values.
    VALUES_ARGS+=(-f "$OVERLAY_DIR/$CHART.yaml")
    VALUES_LABEL="$VALUES_LABEL + ci/selector-match/$CHART.yaml"
    HAS_OVERLAY=1
  fi

  echo "::group::$CHART ($VALUES_LABEL)"

  RENDER="$WORK/$CHART.manifest.yaml"
  if ! helm template "$RELEASE" "$ROOT/$CHART" \
      ${VALUES_ARGS[@]+"${VALUES_ARGS[@]}"} >"$RENDER" 2>"$WORK/err"; then
    sed 's/^/  /' "$WORK/err"
    echo "::endgroup::"
    echo "::error title=selector-match $CHART::$CHART does not render with its CI values, so no selector could be checked. Reproduce: helm template $RELEASE $CHART $(printf '%s ' "${VALUES_ARGS[@]+${VALUES_ARGS[@]}}")"
    FAILED="$FAILED $CHART"
    continue
  fi

  # --- The document split, and the only textual step in this script ----------
  # One YAML sequence item per rendered document, content indented by four and
  # the item marker on a line of its own - so a document whose first line is a
  # comment ("# Source: ...") needs no special case. A wrong split does not
  # produce a false pass: the result stops being parsable and helm exits 1.
  DOCS="$WORK/$CHART.docs.yaml"
  awk '
    BEGIN { print "docs:"; started = 0 }
    /^---[ \t]*$/ { print "  -"; started = 1; next }
    {
      if (!started) { print "  -"; started = 1 }
      if (length($0) == 0) print ""; else print "    " $0
    }
  ' "$RENDER" >"$DOCS"

  JSON="$WORK/$CHART.json"
  if ! helm template y2j "$YAML2JSON" -f "$DOCS" 2>"$WORK/err" \
      | awk '/^\{/ { print; exit }' >"$JSON"; then
    sed 's/^/  /' "$WORK/err"
    echo "::endgroup::"
    echo "::error title=selector-match $CHART::the rendered manifests of $CHART could not be re-read as YAML by ci/yaml2json. That is a parse failure, not a selector finding: either the render contains a document this script's '---' split cut in the wrong place, or the manifest is not valid YAML. Helm's own message is in the job log."
    FAILED="$FAILED $CHART"
    continue
  fi
  if [ ! -s "$JSON" ]; then
    echo "::endgroup::"
    echo "::error title=selector-match $CHART::ci/yaml2json produced no JSON for $CHART - the manifests were not re-read, so nothing was checked."
    FAILED="$FAILED $CHART"
    continue
  fi

  # --- The comparison --------------------------------------------------------
  # Inline, as in ci/run-quantity-render-test.sh, and on the standard library
  # only - json, because the YAML is already gone by this point. It writes one
  # "VERDICT|detail" line per selector and never decides the exit code itself:
  # the loop below does, so a verdict can never be lost to a swallowed status.
  set +e
  python3 - "$CHART" "$JSON" >"$WORK/$CHART.out" 2>"$WORK/$CHART.pyerr" <<'PY'
import json, sys

chart, path = sys.argv[1], sys.argv[2]
docs = json.load(open(path)).get("docs") or []

# A pod template is any value of a key named "template" that carries a spec with
# containers. Found by walking rather than by enumerating kinds, so a CronJob's
# spec.jobTemplate.spec.template is covered without a special case, and so is
# whatever workload kind a chart adds next.
def pod_templates(node, path="$"):
    out = []
    if isinstance(node, dict):
        for key, value in node.items():
            here = "%s.%s" % (path, key)
            if (key == "template" and isinstance(value, dict)
                    and isinstance(value.get("spec"), dict)
                    and "containers" in value["spec"]):
                out.append((here, value))
            out.extend(pod_templates(value, here))
    elif isinstance(node, list):
        for i, value in enumerate(node):
            out.extend(pod_templates(value, "%s[%d]" % (path, i)))
    return out


def labels_of(template):
    meta = template.get("metadata")
    labels = meta.get("labels") if isinstance(meta, dict) else None
    return labels if isinstance(labels, dict) else {}


def name_of(doc):
    meta = doc.get("metadata")
    if isinstance(meta, dict) and meta.get("name"):
        return str(meta["name"])
    return "<unnamed %s>" % doc.get("kind", "object")


def matches(selector, labels):
    """matchLabels only. Every key must be present with the same value; the
    comparison is on the string form, because YAML 'true' and the string
    "true" are the same label value to Kubernetes."""
    for key, value in selector.items():
        if key not in labels or str(labels[key]) != str(value):
            return False
    return True


def classify(selector, where):
    """(matchLabels dict, None) when it can be evaluated, (None, reason) when
    it cannot. A selector this script cannot evaluate is REPORTED, never
    counted as a pass."""
    if selector is None:
        return None, ("%s has NO selector at all. For a topology spread "
                      "constraint that means it matches no pod and is "
                      "therefore vacuously satisfied; for a PodDisruptionBudget "
                      "it is rejected by the API server" % where)
    if not isinstance(selector, dict):
        return None, "%s selector is not a mapping (%r)" % (where, selector)
    match_labels = selector.get("matchLabels")
    if isinstance(match_labels, dict) and match_labels:
        if selector.get("matchExpressions"):
            # matchLabels AND matchExpressions: the matchLabels half is still
            # a necessary condition, so checking it is sound - it just is not
            # the whole selector. Said out loud rather than passed off as full
            # coverage.
            return match_labels, None
        return match_labels, None
    if selector.get("matchExpressions"):
        return None, ("%s selects only through matchExpressions, which this "
                      "test does not evaluate - doing so would mean "
                      "reimplementing label-selector semantics, i.e. a second "
                      "parser. Reported, not counted as passing" % where)
    if match_labels == {} or selector == {}:
        return {}, None  # the empty selector matches every pod
    return None, "%s selector has neither matchLabels nor matchExpressions" % where


# Rooted at "<Kind>/<name>" rather than at "$", because a chart with one
# workload per node group renders several documents whose internal path is
# identical - and then every finding would name the same spot.
all_templates = []
for doc in docs:
    if isinstance(doc, dict):
        root = "%s/%s" % (doc.get("kind", "?"), name_of(doc))
        all_templates.extend(pod_templates(doc, root))

lines = []

# 1. Every topologySpreadConstraints entry, against ITS OWN pod template. That
#    is the strict and the correct comparison: the failure being guarded
#    against is a constraint that does not count the very pods it sits on.
for where, template in all_templates:
    spread = template.get("spec", {}).get("topologySpreadConstraints")
    if not isinstance(spread, list):
        continue
    labels = labels_of(template)
    for i, constraint in enumerate(spread):
        if not isinstance(constraint, dict):
            lines.append("FAIL|%s: topologySpreadConstraints[%d] at %s is not a mapping"
                         % (chart, i, where))
            continue
        key = constraint.get("topologyKey", "<none>")
        tag = "spread[%d] on %s at %s" % (i, key, where)
        match_labels, reason = classify(constraint.get("labelSelector"), tag)
        if match_labels is None:
            if constraint.get("labelSelector") is None:
                lines.append("FAIL|%s: %s" % (chart, reason))
            else:
                lines.append("SKIP|%s: %s" % (chart, reason))
            continue
        if matches(match_labels, labels):
            lines.append("OK|%s: %s matches its own pod template's labels (%s)"
                         % (chart, tag, ", ".join("%s=%s" % kv for kv in sorted(match_labels.items())) or "empty selector, matches every pod"))
        else:
            lines.append("FAIL|%s: %s selects %s but the pod template it is "
                         "attached to carries %s - the constraint therefore "
                         "matches NONE of its own pods, is trivially satisfied, "
                         "and distributes nothing while the rollout stays green. "
                         "Render the chart and compare the selector with the pod "
                         "template's labels; the usual cause is a label renamed "
                         "in one of the two places"
                         % (chart, tag,
                            ", ".join("%s=%s" % kv for kv in sorted(match_labels.items())),
                            ", ".join("%s=%s" % kv for kv in sorted(labels.items())) or "no labels at all"))

# 2. Every PodDisruptionBudget, against ALL pod templates of the render: a
#    budget has no owning template, it only has to select some pod that exists.
pdbs = [d for d in docs if isinstance(d, dict) and d.get("kind") == "PodDisruptionBudget"]
for doc in pdbs:
    tag = "PodDisruptionBudget %s" % name_of(doc)
    spec = doc.get("spec") if isinstance(doc.get("spec"), dict) else {}
    match_labels, reason = classify(spec.get("selector"), tag)
    if match_labels is None:
        lines.append(("FAIL|%s: %s" if spec.get("selector") is None else "SKIP|%s: %s")
                     % (chart, reason))
        continue
    if not all_templates:
        lines.append("FAIL|%s: %s is rendered but this render contains no pod "
                     "template at all, so its selector cannot match anything"
                     % (chart, tag))
        continue
    hits = [w for w, t in all_templates if matches(match_labels, labels_of(t))]
    if hits:
        lines.append("OK|%s: %s matches %d pod template(s): %s"
                     % (chart, tag, len(hits), ", ".join(hits)))
    else:
        known = sorted({"%s=%s" % kv for _, t in all_templates for kv in labels_of(t).items()})
        lines.append("FAIL|%s: %s selects %s, which matches NONE of the %d pod "
                     "template(s) in the same render. A PDB that matches no pod "
                     "never blocks an eviction, so a node drain takes every "
                     "replica at once while the object looks like protection. "
                     "Labels actually present on the pod templates: %s"
                     % (chart, tag,
                        ", ".join("%s=%s" % kv for kv in sorted(match_labels.items())),
                        len(all_templates), "; ".join(known) or "none"))

# 3. Every REQUIRED podAffinity term, against ALL pod templates of the render
#    (Gitea #101). Not against its own template: the whole point of such a term
#    is to select a DIFFERENT workload's pod, so the correct question is whether
#    anything in this release carries the labels it asks for. Preferred terms and
#    anti-affinity of either strength are left alone - see the header.
for where, template in all_templates:
    affinity = template.get("spec", {}).get("affinity")
    if not isinstance(affinity, dict):
        continue
    pod_affinity = affinity.get("podAffinity")
    if not isinstance(pod_affinity, dict):
        continue
    terms = pod_affinity.get("requiredDuringSchedulingIgnoredDuringExecution")
    if not isinstance(terms, list):
        continue
    for i, term in enumerate(terms):
        if not isinstance(term, dict):
            lines.append("FAIL|%s: required podAffinity[%d] at %s is not a mapping"
                         % (chart, i, where))
            continue
        tag = "required podAffinity[%d] on %s at %s" % (
            i, term.get("topologyKey", "<no topologyKey>"), where)
        match_labels, reason = classify(term.get("labelSelector"), tag)
        if match_labels is None:
            if term.get("labelSelector") is None:
                lines.append("FAIL|%s: %s" % (chart, reason))
            else:
                lines.append("SKIP|%s: %s" % (chart, reason))
            continue
        hits = [w for w, t in all_templates if matches(match_labels, labels_of(t))]
        if hits:
            lines.append("OK|%s: %s matches %d pod template(s): %s"
                         % (chart, tag, len(hits), ", ".join(hits)))
        else:
            known = sorted({"%s=%s" % kv for _, t in all_templates for kv in labels_of(t).items()})
            lines.append("FAIL|%s: %s selects %s, which matches NONE of the %d "
                         "pod template(s) in the same render. A REQUIRED "
                         "podAffinity term that matches no pod can never be "
                         "satisfied, so the pod it is attached to stays Pending "
                         "forever - for a CronJob that means one Pending pod per "
                         "schedule and a workload that silently stopped running, "
                         "with nothing in the render to show for it. The usual "
                         "cause is a label renamed in the template that carries "
                         "the selected pod. Labels actually present on the pod "
                         "templates: %s"
                         % (chart, tag,
                            ", ".join("%s=%s" % kv for kv in sorted(match_labels.items())),
                            len(all_templates), "; ".join(known) or "none"))

for line in lines:
    print(line)
PY
  RC=$?
  set -e
  if [ "$RC" -gt 1 ]; then
    sed 's/^/  /' "$WORK/$CHART.pyerr"
    echo "::endgroup::"
    echo "::error title=selector-match $CHART::the selector comparison itself failed for $CHART (python exit $RC). Treated as a failure, never as a pass."
    FAILED="$FAILED $CHART"
    continue
  fi

  CHART_FAIL=""
  CHART_OK=0
  CHART_SKIP=0
  while IFS='|' read -r VERDICT DETAIL; do
    case "$VERDICT" in
      OK)
        CHART_OK=$((CHART_OK + 1))
        echo "  ok     $DETAIL"
        ;;
      SKIP)
        CHART_SKIP=$((CHART_SKIP + 1))
        echo "  gap    $DETAIL"
        ;;
      FAIL)
        CHART_FAIL=1
        echo "  FAIL   $DETAIL"
        echo "::error title=selector-match $CHART::$DETAIL"
        ;;
      *)
        [ -n "$VERDICT" ] && echo "  $VERDICT $DETAIL"
        ;;
    esac
  done <"$WORK/$CHART.out"
  echo "::endgroup::"

  TOTAL_SELECTORS=$((TOTAL_SELECTORS + CHART_OK))

  if [ -n "$CHART_FAIL" ]; then
    FAILED="$FAILED $CHART"
    SUMMARY_ROWS="${SUMMARY_ROWS}| \`$CHART\` | **failed** | $CHART_OK | $CHART_SKIP |"$'\n'
    echo "$CHART: FAILED"
  elif [ "$CHART_OK" -gt 0 ]; then
    CHECKED="$CHECKED $CHART"
    [ "$CHART_SKIP" -gt 0 ] && WITH_GAPS="$WITH_GAPS $CHART"
    SUMMARY_ROWS="${SUMMARY_ROWS}| \`$CHART\` | ok | $CHART_OK | $CHART_SKIP |"$'\n'
    echo "$CHART: ok ($CHART_OK selector(s) matched, $CHART_SKIP not checked)"
  elif [ -n "$HAS_OVERLAY" ]; then
    # The overlay's ONE job is to push this chart over the threshold at which
    # it renders a selector. If it did not, this test is vacuum-green for the
    # chart it was written for, which is the failure the overlay prevents.
    FAILED="$FAILED $CHART"
    SUMMARY_ROWS="${SUMMARY_ROWS}| \`$CHART\` | **failed** | 0 | $CHART_SKIP |"$'\n'
    echo "::error title=selector-match $CHART::$CHART has an overlay at ci/selector-match/$CHART.yaml but rendered no PodDisruptionBudget and no topologySpreadConstraints, so nothing was checked. That overlay exists only to make those objects render - either it no longer reaches the threshold (replica count, a feature switch) or the chart stopped rendering them. A green tick here would be a tick for a check that ran over nothing."
    echo "$CHART: FAILED (overlay present, no selector rendered)"
  else
    NOT_EXERCISED="$NOT_EXERCISED $CHART"
    [ "$CHART_SKIP" -gt 0 ] && WITH_GAPS="$WITH_GAPS $CHART"
    echo "$CHART: no PodDisruptionBudget and no topologySpreadConstraints rendered - nothing to check."
  fi
done

# --- Report ------------------------------------------------------------------
count() { set -- $1; echo "$#"; }
listing() { set -- $1; [ "$#" -eq 0 ] && { echo "–"; return; }; printf '`%s`' "$1"; shift; for C in "$@"; do printf ', `%s`' "$C"; done; echo; }
SUMMARY="${GITHUB_STEP_SUMMARY:-/dev/null}"
{
  echo "### Selector-match render test (Gitea #96)"
  echo
  echo "Every \`PodDisruptionBudget\` selector and every \`topologySpreadConstraints\` label"
  echo "selector in a chart's render, held against the labels of the pod templates in the"
  echo "**same** render. A selector that matches no pod is not a render error and not an"
  echo "install-test failure: the spread constraint is then trivially satisfied and the"
  echo "budget never blocks an eviction, both silently."
  echo
  echo "| Result | Count | Charts |"
  echo "|---|---|---|"
  echo "| Selectors checked and matching | $(count "$CHECKED") | $(listing "$CHECKED") |"
  echo "| No such object rendered | $(count "$NOT_EXERCISED") | $(listing "$NOT_EXERCISED") |"
  echo "| Failed | $(count "$FAILED") | $(listing "$FAILED") |"
  echo
  echo "$TOTAL_SELECTORS selector(s) verified in total."
  if [ -n "$WITH_GAPS" ]; then
    echo
    echo "Charts with selectors this test does **not** evaluate (\`matchExpressions\` only — reported, never counted as passing): $(listing "$WITH_GAPS")."
  fi
  if [ -n "$SUMMARY_ROWS" ]; then
    echo
    echo "| Chart | Result | Checked | Not checked |"
    echo "| --- | --- | --- | --- |"
    printf '%s' "$SUMMARY_ROWS"
  fi
} >>"$SUMMARY"

echo "===================== selector match test ======================"
echo "checked:       $(count "$CHECKED")${CHECKED:+ -$CHECKED}"
echo "not exercised: $(count "$NOT_EXERCISED")${NOT_EXERCISED:+ -$NOT_EXERCISED}"
echo "failed:        $(count "$FAILED")${FAILED:+ -$FAILED}"
echo "selectors verified: $TOTAL_SELECTORS"
echo "================================================================"

if [ -n "$FAILED" ]; then
  echo "ERROR: selectors do not match the pod labels they are meant to select in:$FAILED" >&2
  exit 1
fi

# The second anti-vacuum guard. Reaching zero means every chart fell into "no
# such object rendered", which is indistinguishable from a broken harness - and
# it is the state this test would silently decay into if the overlays were ever
# dropped.
if [ "$TOTAL_SELECTORS" -eq 0 ]; then
  echo "ERROR: not a single selector was checked in this run. Either no chart renders a PodDisruptionBudget or a topologySpreadConstraints any more, or the overlays under ci/selector-match/ no longer push one over its replica threshold. A pass over zero assertions is not a pass." >&2
  exit 1
fi