# Scale the whole chart down without uninstalling it: scaleDown: true renders
# every Deployment/StatefulSet with replicas: 0 (and suspends CronJobs) and
# takes precedence over any per-workload replicas value. PVCs, Secrets and
# Services stay in place; scaleDown: false brings the workloads back up.
scaleDown: false

# Replica count for this workload; 0 is allowed and scales it down.
# The chart-global scaleDown flag takes precedence.
replicas: 1

# This is for setting up a service more information can be found here: https://kubernetes.io/docs/concepts/services-networking/service/
service:
  # This sets the service type more information can be found here: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types
  type: ClusterIP
  # This sets the ports more information can be found here: https://kubernetes.io/docs/concepts/services-networking/service/#field-spec-ports
  port: 80

# This block is for setting up the ingress for more information can be found here: https://kubernetes.io/docs/concepts/services-networking/ingress/
ingress:
  # MUTUALLY EXCLUSIVE WITH httpRoute.enabled - the render aborts when both are
  # true, and the message names both value paths.
  enabled: false
  # Ingress class; set to "" to omit ingressClassName from the rendered Ingress.
  # NOT READ IN GATEWAY MODE: the class is a property of the Gateway there, and
  # the Gateway belongs to the platform.
  className: nginx
  # NOT READ IN GATEWAY MODE either, and this is the one to be aware of: the
  # Gateway API has no annotation channel for controller behaviour, so
  # everything put here is simply gone in that mode. This chart sets nothing
  # itself, and the installation this repository serves does not deploy
  # homeassistant at all (checked 2026-10-12), so there is no operator-supplied
  # annotation here today that the switch would drop - unlike its siblings in
  # the same sweep. That is an absence of evidence about this installation, not
  # a guarantee about yours: whatever you put here disappears in Gateway mode.
  annotations: {}
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  # THE PUBLIC NAMES OF THIS RELEASE, AND READ IN BOTH MODES.
  #
  # This chart is the documented ingress exception (README): it keeps upstream's
  # flexible host list rather than the repository's required
  # domain/clusterIssuer pair, and that exception stays. The consequence for
  # Gitea #114 is that httpRoute has NO hostnames key - a chart-global hostname
  # list could not say which host entry, and therefore which set of paths, it
  # belonged to. So this list is where the hostnames live in BOTH modes, and in
  # Gateway mode the chart renders ONE HTTPRoute PER ENTRY, with one rule per
  # path of that entry.
  #
  # pathType IN GATEWAY MODE, because the default below is the awkward value.
  # Ingress has Exact, Prefix and ImplementationSpecific; the Gateway API has
  # Exact, PathPrefix and RegularExpression. Exact and Prefix map cleanly.
  # ImplementationSpecific means "ask the controller" and has NO counterpart,
  # so:
  #   - on the path "/" it is rendered as PathPrefix (every controller treats a
  #     root ImplementationSpecific path as a prefix match, so the default
  #     below works in Gateway mode unchanged);
  #   - on ANY OTHER path the render ABORTS and asks you to say which you mean.
  #     In ingress-nginx an ImplementationSpecific sub-path is a REGEX and
  #     PathPrefix is not one, so mapping it silently would change how the path
  #     matches while the render stayed green.
  # RegularExpression is deliberately not offered: its support level is
  # Implementation-specific and would bind this chart to one Gateway
  # implementation.
  hosts:
    - host: chart-example.local
      paths:
        - path: /
          pathType: ImplementationSpecific
  # NOT READ IN GATEWAY MODE: the certificate sits on the Gateway's listener.
  tls: []
  #  - secretName: chart-example-tls
  #    hosts:
  #      - chart-example.local

# THE GATEWAY-API ALTERNATIVE TO THE INGRESS (Gitea #114).
#
# Mutually exclusive with ingress.enabled - the render aborts when both are
# true. The chart renders ONLY HTTPRoutes with parentRefs: no Gateway, no
# class, no Certificate, and no implementation-specific policy object. Class
# and certificate sit on the Gateway and its listeners and belong to the
# platform (cluster-config), which is what keeps the Gateway implementation
# replaceable without touching this chart again.
#
# TWO KEYS ONLY, and the missing third one is deliberate: there is no
# httpRoute.hostnames here, because this chart has no ingress.domain either.
# The hostnames and the paths come from ingress.hosts above - see the comment
# there, including the pathType mapping. This is the freesailarr shape from
# group 2 of the sweep, for the same reason.
#
# ONE HTTPRoute PER ENTRY of ingress.hosts, named
# <release>-homeassistant-httproute for the first and ...-httproute-<index> for
# the rest. REORDERING ingress.hosts RENAMES ROUTES and so deletes and
# recreates them on the next upgrade instead of editing them - harmless,
# because a route holds no state and no certificate, but worth knowing before
# it looks like a bug.
#
# THE GATEWAY-API CRDs MUST BE PRESENT. The chart cannot detect them
# (.Capabilities.APIVersions is unreliable at template time) and an HTTPRoute
# without them fails at install, so this is a value and not a guess.
httpRoute:
  enabled: false

  # The Gateway(s) EVERY route of this release attaches to - a platform object,
  # usually in another namespace, whose listener must allow this namespace in
  # allowedRoutes. Entries are the Gateway API's ParentReference (name, and
  # optionally namespace, sectionName, port, group, kind), passed through
  # unchanged:
  #
  #   parentRefs:
  #     - name: public
  #       namespace: gateway
  #       sectionName: https
  #
  # REQUIRED while httpRoute.enabled is true - the render aborts on an empty
  # list, because a route without a parent is created, is valid and routes
  # nothing, with no event to say so. The same list is used for every route
  # this chart renders; the hosts differ, the Gateway does not.
  parentRefs: []

# Documented deviation from the repo-wide hardening standard: the official
# Home Assistant container must start as root — it boots via the s6-overlay
# init system, which performs its setup as uid 0 (the image supports no
# non-root user), so runAsNonRoot/runAsUser are deliberately not set.
# Everything else is hardened: no privilege escalation, all capabilities
# dropped and a read-only root filesystem with writable emptyDirs for
# /tmp and /run (s6-overlay state). NET_RAW is added back because Home
# Assistant's device discovery (DHCP watcher, ping/arp integrations) uses
# raw sockets and logs "Operation not permitted" without it.
securityContext:
  pod: {}
  container:
    allowPrivilegeEscalation: false
    readOnlyRootFilesystem: true
    capabilities:
      drop:
        - ALL
      add:
        - NET_RAW

resources:
  # Limits are optional: memory and ephemeral-storage limits default to
  # limitFactor x the request, an explicitly set limit always wins, and a
  # CPU limit is only set when configured explicitly under "limits".
  limitFactor: 3
  requests:
    cpu: 0.2
    memory: 512Mi
    ephemeralStorage: 128Mi

# This is to setup the liveness, readiness and startup probes more information can be found here: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/
livenessProbe:
  httpGet:
    path: /
    port: http
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 3
readinessProbe:
  httpGet:
    path: /
    port: http
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 3
# The startup probe gates liveness/readiness. Home Assistant can take a while to
# start up, so grant a generous budget: 10s * 30 = 300s.
startupProbe:
  httpGet:
    path: /
    port: http
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 30

# Extra environment variables, appended to the ones the chart always sets.
# Values are rendered through tpl; value, secretKeyRef and configMapKeyRef
# forms are supported.
env: []

# Additional volumes on the output Deployment definition.
volumes: []
# - name: foo
#   secret:
#     secretName: mysecret
#     optional: false

# Additional volumeMounts on the output Deployment definition.
volumeMounts: []
# - name: foo
#   mountPath: "/etc/foo"
#   readOnly: true

nodeSelector: {}

tolerations: []

affinity: {}

core:
  timezone: "UTC"
  storage:
    size: 5Gi
    storageClass: "default"

# Must include the following keys:
# - config
# - http-config
# - recorder-config
#
# Changing the op:// path below IS covered: the StatefulSet carries a
# checksum/secret-ref annotation over the rendered OnePasswordItem, so pointing
# this value at a different vault item restarts the pod.
#
# Known limitation (#82): changing the CONTENT of that item in the vault does
# NOT restart Home Assistant. The operator updates the Kubernetes Secret, but
# the running pod keeps the old files - they are mounted with subPath, which the
# kubelet never refreshes, and Home Assistant reads its configuration only at
# start. The change then takes effect at some unrelated later restart, possibly
# months afterwards, and a broken value surfaces long after the edit that caused
# it. That is especially likely for this release, which is currently kept at
# zero replicas via scaleDown: whoever brings it back up gets whatever the vault
# holds at that moment.
#
# The checksum/config mechanism the other charts use cannot close this gap:
# Helm never sees the content (the operator fills the Secret in-cluster after
# rendering), so there is nothing to hash. The operator's own
# "operator.1password.io/auto-restart" annotation does not close it either - it
# only ever restarts Deployments, never StatefulSets. Verified against
# onepassword-operator 1.12.0: pkg/onepassword/secret_update_handler.go lists
# exactly one workload type (appsv1.DeploymentList), and the PR adding
# StatefulSets is still open. Setting the annotation here would look like a fix
# and do nothing, so this chart deliberately does not set it.
#
# After changing the item, restart Home Assistant by hand:
#   kubectl rollout restart statefulset <release>-homeassistant-sfs
secrets:
  configSecretRef: null