Teil von #157.
The null-safe fallback helpers from #99 pass values through fromYaml, which
goes over JSON and therefore parses every number as float64. Go's "%v"
switches float64 to exponential notation from about 1e6 upwards, so a bare
byte count like 1048576 turned into "1.048576e+06" - not a valid Kubernetes
quantity. The suffix check in multiplyQuantity then aborted the render with
unsupported resource quantity suffix "e+06" in "1.048576e+06"
The second "%v" - the one printing a non-integer product - never reaches that
check and failed silently instead: with a fractional limitFactor it rendered
"1.4999985e+06" into the manifest, which only the API server rejects on apply.
Both call sites now go through a new rss-bridge.formatNumber helper that
forces decimal notation via printf "%.10f" and trims the padding zeros again;
the leading dot in the regex protects "100.0000000000" from collapsing to
"1". Strings such as "512Mi" pass through untouched.
This is the canonical fix from #157, applied verbatim with this chart's
prefix; the round-trip itself is not touched.
Note on this chart specifically: rss-bridge sets explicit memory and
ephemeral-storage limits as chart defaults, and an explicit limit always
wins, so multiplyQuantity is not reachable through this chart's values at
all - the bug was reproduced and the fix verified on a throwaway copy with
those default limits removed. The rendered output for the chart defaults and
for ci/rss-bridge/test-values.yaml is byte-identical to main.
Patch bump: no behavior and no values-schema change.
One step: 2025-08-05 is the immediate successor release, no publication
in between (verified against the project's release list). Tag present on
Docker Hub for amd64 and arm64.
Patch bump, because the changelog review found nothing that touches the
values surface or the chart's behaviour. Checked against the shipped
source of both images rather than against the release notes:
- whitelist.txt format: lib/Configuration.php is byte-identical apart
from its VERSION constant, so the parsing the chart relies on (trim,
split on newline, drop empty entries, "*" wildcard) is unchanged.
- the five production bridges: all present, none renamed. Youtube,
TheHackerNews, ARDMediathek and Reddit are byte-identical; Heise has a
content-level change only (paywalled heise+ items now carry an
archive.is link, two more CSS selectors stripped). The three bridges
removed upstream - Askfm, DansTonChat, FirstLookMediaTech - are none
of ours.
- RSSBRIDGE_* environment mapping: same file, therefore unchanged.
- write paths: re-derived empirically rather than inferred, because the
opcache lock file in /tmp appears in no filesystem diff. The new image
needs exactly the same five, and a control run without /tmp still dies
with "Unable to create lock file: Read-only file system".
- health endpoint: actions/ is identical, /?action=health intact.
- PHP 8.2.28 -> 8.2.29, nginx and Debian unchanged, so the
/run/php/php8.2-fpm.sock path the chart mounts still applies. Measured
fresh-start peak under five concurrent feed fetches: 64.5 MiB on the
new image against 71.1 MiB on the old one under an identical
procedure. Requests and limits stay as they are.
The memory comments in values.yaml are refreshed to the image the chart
now ships, and the older 119 MiB figure is labelled as what it was - a
warm container, not a fresh start.
We stay on the dated release tag. The newest release is itself over
twelve months old and the project now pushes latest and commit-based
sha-* tags continuously, but a sha-* tag is not more released than the
release, only newer, and latest is rolling - both conflict with the
repo's convention of reproducible pinned tags.
Fixes#135
Follow-up to the template-chart hardening fixes in #133, which landed
while this branch was open.
The env block now quotes names, values and keyRef fields. Without it a
value like "5" renders as a YAML number and the API server rejects the
whole manifest. RSS-Bridge takes numeric settings that way
(RSSBRIDGE_http_timeout), so this was reachable with the first env entry
anyone adds.
The port-80 question is settled by measurement rather than by the
"it works in k3d" reasoning #133 warns about. Same pod spec in k3d
(k3s v1.35.5), only ip_unprivileged_port_start changed:
1024, capabilities.drop [ALL] nginx: bind() to 0.0.0.0:80 failed
(13: Permission denied)
1024, plus NET_BIND_SERVICE identical failure - for a non-root
process the capability lands in the
permitted but not the effective
set, so it buys nothing
0 binds, HTTP 200
So the chart cannot buy safety with a capability the way samba does, and
port 80 is not negotiable either: nginx is configured for it inside the
image and the entrypoint's only lever is a sed against a read-only
/etc/nginx. What it can do is stop depending on the node default - the
pod securityContext now pins the sysctl to 0, so the bind no longer
relies on cluster configuration. Verified: the chart-installed pod
reports 0 and answers 200 through the Service.
Worth recording how that failure looks without probes: the entrypoint
backgrounds nginx and then execs php-fpm, so a failed bind leaves a
container reporting Running with no web server at all. Both test pods
above were Running. The probes on /?action=health are what turn it into
a pod that never becomes Ready.
trivy config still reports 0 to act on; the KSV-0117 statement is
updated to the measured reasoning.
Two findings from the Trivy config scan that landed on main in #129.
AVD-KSV-0125 is fixed rather than excepted: writing the image as
docker.io/rssbridge/rss-bridge puts a real registry in the registry
position instead of "rssbridge", which is what ci/trivy/data/ksv0125.yaml
asks for. Verified in k3d that the qualified reference resolves to the
same digest (sha256:0eca99b2...) and still runs.
AVD-KSV-0117 (containerPort below 1024) becomes a scoped, documented
exception. nginx listens on 80 inside the image, and the entrypoint's
only way to change that is a sed against /etc/nginx/sites-enabled/default
which a read-only root filesystem rejects - so the alternative to port 80
is giving up readOnlyRootFilesystem. The premise of the check does not
hold here anyway: the container binds 80 as uid 33 with all capabilities
dropped and no NET_BIND_SERVICE.
trivy config now reports 0 to act on for this chart.
Takes over the four loose manifests in cluster-config/rss-bridge/ as a
proper chart, on the current template-chart standard: strict values
schema, null-safe helpers, computed limits, replicas/scaleDown,
checksum/config, NOTES.txt.
Two things deviate from the repo standard on purpose:
- The Ingress models host AND TLS secret name per entry instead of the
single conventional tls-<release>-<chart>-ingress. The installation
this replaces has grown three separate certificates, one per host.
Renaming them would make cert-manager issue three new ones and leave
each host unreachable until it did - a self-inflicted outage on a
deployment that has been up for over a year. Entries sharing a secret
name are grouped into one tls entry, and omitting the name falls back
to the convention, so consolidating later is a values change.
- Requests and limits are decoupled. The old manifest requested 2Gi of
ephemeral storage, identical to its limit, reserving two gigabytes for
a workload measured at 2.2 MB after fetching all five whitelisted
bridges. The request drops to 64Mi; the limit stays at 2Gi.
Hardening was verified rather than assumed. The image ships no USER and
runs as root by default, but runs fully hardened once its writable paths
are provided: uid/gid 33, readOnlyRootFilesystem, all capabilities
dropped, seccompProfile RuntimeDefault. The writable paths were found by
running the image with a writable rootfs, exercising every bridge and
reading its diff layer - /app/cache, /run, /run/php, /var/lib/nginx.
/tmp did not show up that way, because PHP's opcache creates its lock
file there and unlinks it immediately; it only surfaced when the
hardened container died at startup. Stopping at the first writable path
would have shipped a chart that cannot start.
Probes use the app's own /?action=health, which renders fixed JSON
without touching the cache or any remote site, so neither a scraped site
going down nor an unwritable cache can restart the pod.
Fixes#128
jlab-renovate-bot
jklein