24 Commits

Include renames

Author	SHA1	Message	Date
jklein	59d2614384	feat(ci): the chart bump follows the app bump ... The version-bump hook classified every app update that was not a major as a chart patch, so an app minor arrived as a patch - the mechanism behind the sonarr incident, where a security default was switched off inside a bump the conventions told the reviewer not to read (Gitea #128). ci/renovate-bump-chart.sh now takes the level from Renovate's update type, passed in as a second argument: major -> major, minor -> MINOR, patch/digest/pin -> patch. The level comes from Renovate rather than from comparing appVersion because an appVersion comparison is blind to the case that prompted the rule - freesailarr keeps a hand-maintained appVersion for ten upstreams, and prowlarr's 2.5.2 -> 2.6.5 moved an image tag in values.yaml while appVersion stood still. Three properties come with it: - Maximum, not replacement. The chart jump is the greater of the chart's own classification and the app jump, so a value that becomes required stays a major under an app patch. Mechanically it is also what makes a grouped branch deterministic: the hook runs once per update from the same base commit, so without it the last call would win. - Non-semver app versions stay at patch for a minor (seven charts). In CalVer and date tags the second position is a month; in a four-part or suffixed version the positions are not semver positions. An app major is not subject to it. - A missing or unknown update type falls back to the pre-#128 behaviour. postUpgradeTasks only runs where the command is allow-listed on the shared instance, which is not visible from here and fails silently, so the worst case is the old classification rather than every chart PR red on the version check. ci/run-bump-level-test.sh holds 49 cases against the version string the script writes, wired up as the bump-level job: a wrong level is a valid version string, so the PR would go green and the only symptom would be a number that understates what it publishes. The convention texts follow in CLAUDE.md and README, including the limit the decision deliberately keeps: the reading duty was rejected, so the incident stays repeatable and the honest number is the whole of the remedy. Fixes #128	2026-10-13 18:47:44 +00:00
jklein	d36112aaf6	chore(renovate): group the freesailarr stack into one PR per cycle ... The first groupName in this config, and a deliberate reversal for one chart of the stance the file records above its app-version managers: that the helm-values manager finds freesailarr's ten images and proposes one update per image. That described what Renovate does, not what the chart wants. For every other chart here one PR per image is already one PR per chart. What it fixes, measured against the Gitea API on 2026-10-12: eight of the ten images had an open PR at the same moment (#102, #103, #104, #105, #106, #107, #108, #111). Each edits freesailarr/values.yaml and, through the postUpgradeTasks hook, freesailarr/Chart.yaml - so the API reported mergeable: false for all eight, since they rewrite the same version: line. One can merge; the other seven then need a rebase each, and every rebase restarts the most expensive install-test in this repo. The second symptom is sharper: all eight carried version: 3.1.1+up1.0.0 -> 3.1.2+up1.0.0 while main already stood at 3.3.0+up1.0.0, because the hook derives everything from the base commit and those branches predated the Gateway-API rounds. A rebase repairs it, which is the point - nothing fails if the rebase does not happen first. Two rules rather than one, and not for tidiness: renovate rejects the combination outright with "packageRules cannot combine both matchUpdateTypes and separateMinorPatch", a config-validation error. That is consistent, since separateMinorPatch decides the split a rule would then be selecting on. Without the second rule the group still arrives as two PRs - verified by dry-run against a checkout holding those eight updates, they split onto renovate/freesailarr-stack (the three minors) and renovate/patch-freesailarr-stack (the five patches); note that the setting prefixes the branch rather than suffixing it. With both rules, one branch carries all eight. Decisions, with their reasons in the rules themselves: matched by file name so that no second list of image names has to be kept current (an image added later would silently never join the group); mediathekarr included, since its digest PR blocks the others identically - checked with a stale digest, because a current pin makes a working and a broken rule look the same; gluetun and busybox included, as neither's role has anything to do with the blocking; and majors kept out via matchUpdateTypes, so the stepwise app-major procedure and separateMultipleMajor keep working. What it cannot show from here: Renovate runs as the shared instance outside this repository, so the evidence available is a config that validates and a local lookup that groups as intended - not the next real run.	2026-10-12 22:00:42 +00:00
jklein	50f683776e	feat(cyberchef): Gateway-API as an alternative to the Ingress (pilot) ... The Gateway-API pilot of Gitea #114: one chart, the convention, the CI that holds it. The remaining 20 charts follow in their own PRs. The form, additive and off by default: httpRoute: enabled: false # counterpart to ingress.enabled parentRefs: [] # the Gateway - a platform object hostnames: [] # empty = [ingress.domain] Only HTTPRoute with parentRefs is rendered: no Gateway, no gatewayClassName, no Certificate, and no implementation-specific policy object. That subset is identical on nginx-gateway-fabric, Cilium, Envoy Gateway and Istio, which is what lets the implementation be chosen later without touching the charts again. Class and certificate move to the platform. Four guards, all against silent failures: - mutually exclusive with ingress.enabled, with a render abort naming BOTH value paths. A migration runs over a second hostname, not in parallel. - parentRefs mandatory in Gateway mode, render abort on the empty list: a route without a parent is created, is schema-valid, and routes nothing. - hostnames empty means [ingress.domain], so the hostname has one source. - the mode is a VALUE, not auto-detection: .Capabilities.APIVersions is unreliable at template time and a missing CRD fails at install time. ingress.clusterIssuer was already only read inside the Ingress template, so the "conditionally required" half of #114 needed no change in this chart - checked rather than assumed, and it has to be re-checked per chart in the sweep. CI, both halves, because neither covers the other: - the install-test installs cyberchef in GATEWAY mode against the REAL Gateway-API CRDs (standard channel v1.6.3, pinned and Renovate-tracked, applied --server-side). A schema-less stub would accept a malformed route and prove only that something was created. The Ingress path of this one chart is no longer installed; it is a built-in type that never routed in k3d anyway, and helm lint renders this chart's defaults - Ingress mode - on every PR. - ci/run-httproute-match-test.sh, over every chart on every PR: every backendRefs entry must name a Service, on a port, that the SAME render creates, and parentRefs must not be empty. The CRDs accept both of those mistakes, so the schema cannot catch them, and the only report would be a route status no controller writes in CI. What stays unprovable, and is written down instead of implied: that traffic flows. No Gateway controller runs in k3d. Minor: additive with unchanged defaults, proven by an empty helm template diff against origin/main for the default values. Part of #114	2026-10-12 15:16:26 +00:00
jklein	b39f36ff5c	feat(bulwark): new chart for Bulwark Webmail (1.0.0+up1.12.0) ... A JMAP webmail client for the stalwart chart (Gitea #65): StatefulSet, one PVC at /app/data, Service plus headless Service, Ingress at a host root, two OnePasswordItems, three probes, computed limits, replicas plus scaleDown, strict values.schema.json. Everything below was measured against the source at tag 1.12.0 rather than read out of the documentation, which was wrong about three of them. THE DEFINING PROPERTY: THE VOLUME BEATS THE CHART, FOR EVERY VALUE, SILENTLY. configManager.get resolves "admin override > env var > default", the admin dashboard may write any key of CONFIG_ENV_MAP, and nothing reports that it just disconnected the chart - so a helm upgrade can succeed and change nothing. Upstream documents this for the server URL only; it is true of everything. Exactly three values escape it (SESSION_SECRET(_FILE), ADMIN_PASSWORD, BULWARK_TELEMETRY). The value that closes it, bulwark.adminConfigReadOnly, defaults to false because its price is threefold: it freezes the settings policy (and with it the only way to move Web Push off the vendor relay), it freezes an override that ALREADY exists instead of removing it, and on a fresh install it stops admin.json from being written at all - so the admin dashboard never comes up and its login answers HTTP 500 while the pod stays Ready. OIDC-only sign-in, with the real way back out of a lockout: not helm upgrade with OAUTH_ONLY=false (oauthOnly goes through the same precedence chain) but removing the override in the admin dashboard. That is why ADMIN_PASSWORD is set - the dashboard is the door. It generates no random password and logs nothing, so the #65 analogy does not apply. SESSION_SECRET_FILE and OAUTH_CLIENT_SECRET_FILE are both used - the better path garage (#81) and keycloak (#83) did not have - in one projected volume mounted WITHOUT subPath, because both are re-read on every use and a subPath mount is never refreshed, and at mode 0440 because secret files are owned by root and fsGroup only supplies the group. Two backup statements, both at the value: without the session secret the synchronized settings are unreadable out of an intact volume, and if the dashboard's OAuth setup was ever used the client secret sits in config.json on that volume in cleartext. Probes: all three a plain GET on /api/health, with the limit written at the readiness value - it carries process, HTTP acceptance, a free event loop and Next.js routing, and nothing about the reported state or about Stalwart. No ConfigMap, so the checksum/config rule (#82) has nothing to attach to, and values.yaml says so explicitly; the op:// paths are covered by checksum/secret-ref. Renovate: no versioningTemplate, measured rather than assumed. 315 tags in eight shapes (releases, a second v-prefixed family of the same images, an -always flavour, floating minors and names, commit SHAs, betas, attestations) and plain docker versioning excludes all six unwanted ones. Dry runs at 1.12.0, 1.11.0 and 1.10.0 are recorded in the block. Part of #89 - deliberately not "Fixes", because one binding decision of the issue was changed out of necessity and wants ratification rather than an automatic close: the plan specifies HEAD /api/health for all three probes, and a Kubernetes probe cannot send HEAD at all (HTTPGetAction has no method field; the kubelet always issues GET). The alternative, an exec probe, would mean starting a Node process every few seconds in an image that carries no curl and no wget. GET is used instead and is marginally more capable than HEAD, so every limit the issue argues is unchanged - but the decision is the maintainer's to confirm.	2026-10-06 10:15:27 +00:00
jklein	4c1cff1744	feat(keycloak): new chart for Keycloak (1.0.0+up26.8.0) ... Two replicas with cache=ispn, clustered through Keycloak's default jdbc-ping stack: discovery runs over the PostgreSQL that is there anyway, so no headless Service and no JGroups wiring. Deployment rather than StatefulSet - Keycloak 26 keeps everything in the database, user sessions included. The chart's defining property is that it has TWO INIT CONTAINERS and needs both. db, health-enabled and metrics-enabled are Keycloak BUILD options (verified in the 26.8.0 option table), the published image is augmented with their defaults, and supplying different ones at runtime makes Keycloak rewrite /opt/keycloak/lib/quarkus at start - which readOnlyRootFilesystem: true forbids and which upstream describes as a start that "creates an image that is mutable". Not setting db is no way out: the probes alone force it, because health-enabled is a build option too. An empty emptyDir over that path fails as well, because QuarkusEntryPoint loads quarkus/quarkus-application.dat before it dispatches any command, `build` included. So one init container seeds the directory into a volume, the next runs `kc.sh build` into it, and the serving container runs `start --optimized` - every container keeping the full hardening baseline, with no documented deviation to carry. Build options therefore exist in exactly one place, and the asymmetry is enforced rather than trusted: the serving container passes no build option at all, and a build option's variable name in keycloak.env fails the render with a message naming it. Hostname handling is the security-relevant part. KC_HOSTNAME is derived from ingress.domain as a full URL (which upstream requires alongside hostname-admin), hostname-strict stays at its default true, and proxy-headers is set rather than optional. The admin hostname is NOT presented as an access control: upstream states that hostname-admin "does not prevent accessing the Administration REST API endpoints via the frontend URL specified by the hostname option", so the chart renders no /admin deny rule and values.yaml, NOTES.txt and the wiki all say in the same words that restricting that API is reverse-proxy work. The management port 9000 is a containerPort and a ClusterIP Service for in-cluster scraping, and is in no Ingress: it serves /health/* and optionally /metrics without authentication. Liveness uses /health/live and deliberately not /health or /health/ready - those include the database, and a liveness probe on them would restart the whole cluster for as long as the database is away. Also in this change: - First PodDisruptionBudget in this repository, which makes it a convention (README section 11): minAvailable as a value, and rendered only while the computed replica count is >= 2, because minAvailable: 1 with one replica blocks every node drain forever with a message that names the PDB rather than the replica count. - First quay.io image, so quay.io joins the trusted registries in ci/trivy/data/ksv0125.yaml - configured rather than suppressed, so AVD-KSV-0125 keeps being able to say something. - Renovate block with NO version constraint, which is the counter-case to garage and stalwart and is measured rather than assumed: docker versioning already excludes the -N rebuild tags, the floating minors and latest/nightly. Three dry-run fixtures are recorded at the block, and against the committed config 26.7.4 offers exactly 26.7.5 (patch) and 26.8.0 (minor). - No automerge exception, by decision (Gitea #83): the global automerge applies, and the minor-upgrade procedure plus `kc.sh update-compatibility` is documented in NOTES.txt instead. - Two upstream defaults deviated from, each with its reason at the value: db-pool-max-size 20 instead of 100 (two replicas at 100 ask a default PostgreSQL for twice its max_connections), and uid 1000 / gid 0 instead of this repo's 20000/1000, because the image declares keycloak:x:1000:0 and chowns its install tree to that pair. Part of #83	2026-10-04 18:00:20 +00:00
jklein	79b7e44fdc	feat(garage): new chart for the Garage object store ... One Garage node with replication_factor = 1, built from template-chart to the style guide rather than copied from upstream's in-tree chart (Gitea #81). The single-node trade is deliberate and its price is named at the value: the factor applies to the metadata as well, where upstream calls a corrupted database "generally not recoverable" and a replicated volume replicates the corruption faithfully. The three countermeasures that work at factor 1 are therefore mandatory, not optional - metadata_fsync = true (off in Garage's defaults), the automatic metadata snapshots, and those snapshots on a second PVC. Storage: PVC 1 carries metadata_dir AND data_dir as two subdirectories, because volume snapshots are atomic per volume and that is what keeps index and blocks consistent with each other; PVC 2 carries metadata_snapshots_dir, because a recovery point must not die with the volume whose corruption it should repair. Garage creates all three directories itself, which matters because the image is FROM scratch and has no mkdir. Two corrections to the approved plan, both verified against the source at tag v2.4.1 and decided on the issue before implementation: - The RPC secret arrives as GARAGE_RPC_SECRET via secretKeyRef, not through rpc_secret_file. The file form cannot work in a non-root pod: read_secret_file rejects any mode with a group or other bit set (src/garage/secrets.rs:144, mask 0o077) while the kubelet OR-s the group-read bit onto every file of a secret volume once fsGroup is set (pkg/volume/volume_linux.go), and Kubernetes can set the group of such a file but never its owner. The mechanism is documented at the value so the next round does not "fix" it back. - The first start is done by the server, not by hand: garage server --single-node creates the layout in-process before any listener opens, is idempotent on the layout version and has no --version argument that could be reused, and --default-access-key/--default-bucket import key and bucket FROM the vault item. Both premises of the original "manual first start" decision fell with that. Probes follow from the same source reading: readiness is GET /health on the admin port, which answers 503 while no layout exists; liveness and startup are a TCP connect, because a probe that can only fail would restart a node waiting for its layout forever (same lesson as zipline, README 12.3). The S3 listener binds independently of the layout, so a TCP probe on 3900 would have been the lie the plan warned about. CI: fixtures under ci/garage/ rather than an exclusion - with --single-node the pod reaches Ready on its own, which makes the install-test an assertion about the layout, the one-PVC subdirectory layout and readOnlyRootFilesystem instead of a formality. The Renovate block carries a regex versioning anchored to ^v<major>.<minor>.<patch>$, because the registry receives 40-character commit-SHA tags almost daily (measured 2026-10-03: the newest 22 tags are all of that kind) and the four v1.99.x-internal builds sort above the v1.3.x line. Part of #81	2026-10-03 20:29:38 +00:00
jklein	780cb8eafd	feat(stalwart): new chart for the Stalwart mail server ... Cluster-capable from the start, with roles rather than symmetry: one StatefulSet per entry of the "nodes" map, the key passed in STALWART_ROLE. Since v0.16 Stalwart keeps its whole configuration inside the data store and manages it over JMAP, so the chart's scope is deliberately narrow: it renders config.json (exactly the DataStore object), the workloads, the Services, the NetworkPolicies, the Ingress and a cert-manager Certificate. Listeners, blob store, in-memory store, TLS object and cluster roles are operator work in the WebUI, which is why NOTES.txt carries an eight-step first install. config.json stays secret-free: authSecret uses the EnvironmentVariable variant (verified against the serde definition of PostgreSqlStore at v0.16.24), so the password arrives through secretKeyRef and checksum/config stays meaningful. The username cannot follow it - authUsername is a plain String with no secret form - so it is a public value and says so. Services are per PORT, not per group: a NodePort is cluster-unique, so "full" and "mx" can only accept SMTP behind one Service, selected through a per-port pod label. The http port gets a per-group ClusterIP Service instead, so the Ingress reaches exactly ingress.nodeGroup. Four traps, documented rather than explained away: - The role lookup FAILS OPEN. A node whose ClusterRole is missing from the database enables every listener and every task while staying Running with a green probe, and the log line arrives after the listeners are bound. Hence mx at replicas 0, per-port Services, and a NetworkPolicy that is a ceiling independent of what was bound. - NET_BIND_SERVICE is a documented deviation needed to EXEC, not to bind. The image sets setcap cap_net_bind_service=+ep, which makes the kernel fail execve when the bounding set is empty. The values comment says both why it is there and that it is never used, because the second half is what stops the next hardening pass from removing it. - externalTrafficPolicy must be Cluster - no pod runs on a control-plane node while the HA proxy delivers to them, so Local would drop every packet - and the source address that costs is restored only by the HA proxy's PROXY v2 header. - /healthz is rate-limited to 100 requests/60s per source IP, which is a node IP for kubelet probes, so all pods on a node share one bucket. The probe intervals are calculated (6 req/min/pod, ~16 pods per node) and the sum is a comment in values.yaml. A first install needs bootstrap.enabled: true: the setup wizard appears only when config.json is ABSENT, and this chart always renders one, so recovery mode is upstream's documented path for a templated config.json. Second chart in the repo with a dependency - the Valkey project's own chart, off by default behind condition:, because Stalwart's cluster coordinator rides on the in-memory store connection. The render aborts when more than one pod runs with no in-memory store address anywhere. Also wired up: publish-stalwart.yml through the shared block in workflow-util/pipelines, the change-app-version.yml choice list, a Renovate customManagers block anchored on the v prefix (which excludes the moving latest / v0.16 / -alpine tags), CI fixtures, and the README and CLAUDE.md lines that claimed ytdlp-web-player was the only chart with a dependency. Verified locally: ci/helm-dependencies.sh, helm lint --strict (0 failed), helm package, helm template against chart defaults and against ci/stalwart/test-values.yaml, the rendered config.json parsed as JSON with the field types the serde definition requires, ci/run-quantity-render-test.sh (0 failed, both nodes.*.resources paths exercised), NOTES.txt rendered through a scratch ConfigMap, and the null-safety and fail paths (securityContext=null keeps NET_BIND_SERVICE; a cluster without an in-memory store, an unknown port name, a group without http and an unknown ingress.nodeGroup all abort with a named message; the schema rejects timeout, a string timeoutMs and a list-shaped nodes). NO runtime verification was possible - there is no k3d or Docker daemon in this workspace. Part of #65	2026-10-02 20:59:17 +00:00
jklein	813c796a7b	feat(valkey): one Valkey instance per application (1.0.0+up9.1.2.alpine) ... A new chart for a single Valkey instance per application, replacing the shared cluster-redis whose separation rests on one ACL file in one 1Password field - a construction in which every change touches six applications and which cost a month of Paperless standstill. Shape: StatefulSet with one replica, ClusterIP Service, no cluster mode, no Ingress and no value to add one. The password arrives as a finished configuration line ("requirepass <secret>") in the 1Password field auth-conf, is mounted as a file and included by the main configuration - never in argv, never in the environment. The include is rendered last, so nothing in extraConfig can override it. Because a misspelled or empty field would leave an open server that looks perfectly healthy, an init container greps the mounted file for the line and refuses to start the pod without it; it never prints the file. maxmemory is derived from the computed memory limit (maxmemoryFactor, default 0.75) and a configured value above that limit aborts the render: otherwise the kubelet's OOM kill decides what the eviction policy was configured to decide. Persistence and eviction are documented as pairs - queue (PVC + noeviction, the default) and cache (emptyDir + allkeys-lru) - and the combination "no persistence + noeviction" carries a warning in values.yaml and in NOTES.txt. Probes: valkey-cli ping as an exec probe, authenticated through VALKEYCLI_AUTH read out of the mounted file, with "-e" and an assertion on the answer PONG. Without -e valkey-cli exits 0 on an error reply (valkey 9.1.2, src/valkey-cli.c: the config.set_errcode branch in cliReadReply), which would make the probe unable to fail. Hardening: uid 999 / gid 1000 - the image's own valkey user - with fsGroup matching, runAsNonRoot, readOnlyRootFilesystem, all capabilities dropped and seccompProfile RuntimeDefault in the pod context so the init container is covered too. /data is the only writable path. NetworkPolicy on by default (first chart in this repo with one), with a switch and a list of additional namespaces; values.yaml names that it is only a boundary where the CNI enforces policies. Wiring: publish-valkey.yml, the chart-name choice list, ci/valkey fixtures for the persistent variant, a plain docker-versioning Renovate block, README chart row.	2026-09-27 11:24:55 +00:00
jklein	93fdb3eaea	sure: new chart for the we-promise Sure app (1.0.0+up0.7.4) ... One StatefulSet with two containers - the Puma web process and a Sidekiq worker - sharing one ReadWriteOnce PVC at /rails/storage. That shared volume is the reason they live in one pod: splitting them would need an RWX volume. Only the web container migrates, because the image entrypoint runs db:prepare solely for the './bin/rails server' command; the worker is started through args: so the entrypoint (and its jemalloc preload) stays in place and the two can never race. Probes are chosen for what they prove: liveness and startup use Rails' /up, which is a boot check and touches no database, while readiness uses '/', which runs User.count through authenticate_user! in self-hosted mode and therefore fails while Postgres is unreachable. The worker speaks no HTTP, so all three of its probes ask sidekiqmon whether this pod still holds a Sidekiq heartbeat in Redis. Three OnePasswordItem CRs (app, database, redis), ingress.domain kept required outside the Ingress because APP_DOMAIN and the WebAuthn relying party read it, strict values.schema.json, CI fixtures with throwaway Postgres 16 and Redis, and a Renovate manager on semver so the -alpha/-rc/-hotfix channel and the moving tags are never selected.	2026-09-26 21:08:55 +00:00
jklein	02b3c3ce75	renovate: align the config with cluster-config ... The shared jlab-renovate-bot instance serves this repo and cluster-config, and two repos behaving differently under one bot is a source of surprises rather than of safety. This adopts cluster-config's configuration: config:best-practices in extends, labels ["renovate"], no PR caps (prHourlyLimit 0, prConcurrentLimit 100), separateMinorPatch, an explicit dependencyDashboard, and global automerge with platformAutomerge. Two of those choices were previously wrong here and are now right, because the branch protection on main has caught up: a review requirement and validate-charts as a required check are both active. platformAutomerge therefore arms the PR on the forge and Gitea merges it when the check passes AND the review exists - the review is the gate, which is what makes automerging majors something other than unattended merging. Comments that asserted the opposite are rewritten rather than left to rot: the platformAutomerge: false comment ("not (yet) a required check on either side"), the "Majors stay manual" rule, the README PR policy bullets and the required-check paragraph, and the CLAUDE.md forge notes. config:best-practices pulls in docker:pinDigests, which is switched off again for custom.regex and helm-values: an appVersion: is a tag by construction and has nowhere to put a digest. Kept deliberately: minimumReleaseAge of three days on the routine updates (every merge here publishes a chart), the ignorePaths and ci/** opt-outs, every per-chart manager, the nginx and qbittorrent constraints, and postUpgradeTasks. Fixes #34	2026-09-22 19:44:28 +00:00
jklein	ae621746a1	Merge main into the MediathekArr branch ... The branch predates the Gitea move (#253) by 37 commits and both sides touched the same two files. Merged rather than rebased, so the signed commit of the original work stays intact, and resolved by combining rather than choosing - both statements are true at once: the chart has ten images now, and the repo lives on Gitea. README.md, the one real conflict: this branch rewrote the freesailarr image bullet from nine upstreams to ten, while main had grown a minecraft-server bullet next to it that this branch never had. Kept both - our "ten" wording and main's new bullet. renovate.json5 merged cleanly, but "cleanly" is not "correctly", so the result was read rather than trusted: the freesailarr exception now says ten and gained the pointer to the mediathekarr digest block, while the two things main added right beside it survived unchanged - the note that the post-upgrade hook is allow-listed on the shared Gitea instance, and the forge-neutral wording of the automerge rule. Nothing from before the move brought "GitHub" back into a sentence that had been made neutral.	2026-09-17 11:40:21 +02:00
jklein	c3889a66b6	Drop the Renovate workflow: the Gitea side already has a shared instance ... A measurement overtook this part of the change. A shared `jlab-renovate-bot` instance already runs on the Gitea side and already has this repository enrolled - its first run there opened PRs for searxng and gotenberg plus the dependency dashboard. A second runner in this repo would produce duplicate PRs and two schedulers rewriting each other's branches, so .github/workflows/renovate.yml is removed again. Two things fall out of that run, and both were open risks: - The instance reads our renovate.json5. searxng and gotenberg are customManagers targets of ours - no built-in manager finds an appVersion in a Chart.yaml - so the config is demonstrably in effect. - allowedCommands is already granted there. The searxng PR's diff carries `version: 1.0.4+up2026.9.11.ffe96f8a6 -> 1.0.5+up2026.9.13.96479fff6` next to the appVersion, and nothing but ci/renovate-bump-chart.sh writes `version:`. Had that allow-list been missing, postUpgradeTasks would have been skipped SILENTLY and every chart PR on Gitea would have been red on the version check with nothing naming the cause. With the workflow gone there is no container image to pin either; verified by dry run that the ghcr.io/renovatebot/renovate dependency is no longer extracted, while TRIVY_VERSION still is - that one belongs to the Trivy replacement and stays. README and CLAUDE.md now say Renovate runs on Gitea as an existing shared instance and that no workflow belongs here, so the next reader who finds none knows why instead of building one.	2026-09-16 15:49:36 +02:00
jklein	a6c27ebef3	Prepare the Gitea move: measured CI deviations, self-hosted Renovate, issue migration script ... Groundwork for #225, built on a throwaway pull request against the Gitea instance rather than on assumptions. The move itself is not part of this change - no Actions are switched off, no mirror is enabled, no branch protection is touched. What the probe run measured, and what follows from it: - Which jobs need a Docker socket: only the install-test. Measured per job - detect-changed-charts, build-chart, the quantity render and the Trivy config scan all pass on `ubuntu-latest`, which on that instance has no socket. The install-test dies there at "Create k3d cluster" with "Cannot connect to the Docker daemon", an error naming k3d and never the runner label. Its `runs-on` is now an expression: the label `ubuntu-docker` on Gitea, `ubuntu-latest` on GitHub, because the former does not exist there and a chart PR would otherwise queue forever during the handover. Gitea evaluates it - the probe job was taken by the docker runner. - The install-test still cannot pass on Gitea. That daemon is rootless with "Cgroup Driver: none"; the k3s node restarts immediately with an empty log because k3s needs cgroup delegation. The label is necessary and not sufficient, and the fix is the maintainer's. - aquasecurity/setup-trivy cannot be used on Gitea: it checks out aquasecurity/trivy from github.com with `github.token`, which there is a Gitea token, and ends on "could not read Username for https://github.com". Replaced by the release tarball - one request, same behaviour on both forges, green on the probe run. Also in this change: - .github/workflows/renovate.yml, Renovate in self-operation: a daily scheduled run in the official container, inert on github.com via a `github.server_url` guard. Every rule proved by dry run instead of assumed - the pinned Renovate image is tracked by the built-in github-actions manager (44.80.0 -> 44.87.1, minor), TRIVY_VERSION is still tracked after setup-trivy is gone (v0.72.0 -> v0.74.0, minor), and `ubuntu-docker` is not extracted by the github-runners manager at all, so nothing will quietly "correct" it. - ci/migrate-issues-to-gitea.sh, runnable, with --dry-run, and NOT run. Its header names what it cannot do: comment authorship, the #<n> references between issues, and attachments. - CLAUDE.md and README.md on the new flow: which forge and which tool, auto-merge on green checks in place of the merge queue Gitea does not have, and the measured differences of the two CIs. Refs #225 - deliberately no "Fixes": the move is not finished with this.	2026-09-14 17:07:31 +02:00
jklein	78d7020dab	freesailarr: MediathekArr as the tenth container, off by default (3.1.0+up1.0.0) ... MediathekArr fakes a Usenet indexer towards Prowlarr and a SABnzbd downloader towards Sonarr/Radarr and fetches from the ARD and ZDF media libraries. Both consumers already share gluetun's network namespace, so they reach it over 127.0.0.1 - no service, no DNS, no ingress detour. Purely additive: the flag defaults to false and a default render is byte-identical to 3.0.5 (verified against the previous chart for both the default values and the CI values). The four things that fail silently without them: - A START GATE on gluetun. MediathekArr fetches its ruleset once at start and never retries; started before the tunnel it answers every Newznab search with 0 results while the container is up, Ready and quiet. Kubernetes cannot order two regular containers and an initContainer would deadlock, so the wait sits in front of the image entrypoint: poll gluetun's health server on 127.0.0.1:9999 and exec the entrypoint afterwards; on timeout the container exits rather than starting blind, because a crash loop is visible and an empty indexer is not. The startup probe budget (300s) deliberately outlasts the gate (180s). - incomplete/ AND complete/ ON THE SHARED DOWNLOADS CLAIM, not in an emptyDir. An emptyDir counts against the container's ephemeral-storage limit, and one large download would have the kubelet evict the whole pod with all ten containers - the trap ytdlp-web-player documents. - THE COMPLETE PATH SONARR SEES. The claim is mounted at /downloads exactly as sonarr/radarr mount it, and the chart sets DOWNLOAD_COMPLETE_PATH itself, so the SABnzbd complete_dir it reports is the same absolute path on both sides. - TWO PORTS: 5007 (SABnzbd role and UI, primary) and 5008 (Newznab role for Prowlarr), both declared to gluetun's firewall and both on one Service. The SABnzbd API is at /download/api - /api on 5007 answers with a misleading Newznab validation error. Further details: - Image pinned by digest (tag + digest): "latest" is a 2024 build, "beta" moves. Single-arch linux/amd64. The built-in helm-values manager cannot follow that pair, so renovate.json5 gets the chart's first customManagers block; verified by dry-run with two fixtures, since a matching and a broken rule look identical while the pin is current. - Hardened as measured: non-root, uid/gid from puid/pgid, readOnlyRootFilesystem: true, all capabilities dropped, no PUID/PGID. - Probes on measured 200 endpoints (there is no health endpoint): readiness and startup on /download/, liveness as an exec covering BOTH ports, because one container runs two processes and a wedged Newznab half is exactly what makes searches come back empty. - No ingress by default: the UI links its assets with root-absolute paths, so it can only be served at the root of a host; on the shared domain that root belongs to seerr. A sub-path fails the render instead of producing a broken UI. - values.yaml and NOTES.txt document the geo MARKER PROCEDURE (not a table of series), the escape route of a German exit and its price for the whole stack, the fail_message: null trap, and the HLS question as an open question. - CI: mediathekarr enabled in ci/freesailarr/test-values.yaml, install timeout raised to 1200s for the extra image and the gate. Fixes #245	2026-09-08 23:20:16 +02:00
jklein	6b0d8c9232	ytdlp-web-player: new chart with an optional oauth2-proxy subchart (1.0.0+upv1.2.0) ... Deploys matszwe02/ytdlp_web_player, a Flask app that fetches videos with yt-dlp, transcodes them with ffmpeg and serves them as HLS. It ships no authentication of any kind, so the chart carries a preconfigured oauth2-proxy as an optional subchart, in the data path in front of the app. This is the first chart in the repo with a dependency, so the rule "charts have no dependencies" falls here. It is replaced in CLAUDE.md and README.md by a bar: a dependency has to be optional and off by default, upstream's chart is consumed as it comes (documented where it falls short of our conventions, never patched), and the price is written down - above all that a subchart is invisible to everything downstream watching Helm release versions, so a new proxy release only reaches a cluster when this chart is republished. CI learns the dependency in five places, not the three the plan expected: helm lint, package, template and install all exit 1 while charts/ is unfilled, so ci/helm-dependencies.sh runs before lint and package in validate-charts.yml, before package in publish-helm-chart.yml, and inside run-install-test.sh, run-trivy-config.sh and run-quantity-render-test.sh - the last of which renders every chart on every PR and would have gone red first. Notable chart decisions, each measured rather than assumed: - The image has no USER and runs as root by default, but not by necessity: it runs under an arbitrary uid with readOnlyRootFilesystem and the full hardening baseline. Only the pinned uid is a deviation, and it is documented. - Two emptyDirs, each justified separately. /data holds the video cache (DATA_PATH). /tmp is NOT mounted - measured across metadata extraction, HLS transcoding, sprite generation and audio extraction, the image never writes there. What it does write is $HOME/.cache, so /cache is mounted with HOME and XDG_CACHE_HOME pointed at it; without it yt-dlp re-downloads its JavaScript challenge-solver from github.com on every extraction. - The proxy is wired through config.configFile, the only value the subchart passes through tpl - config.upstreams is emitted with toJson and would carry a literal {{ .Release.Name }} into the manifest. - Rendering aborts when this chart's Ingress and the proxy's claim the same host: ingress-nginx rejects the second one and a Fleet bundle then sits in ErrApplied until forceSyncGeneration is bumped. Fixes #214	2026-08-30 17:34:49 +02:00
jklein	8df1913c5c	bentopdf: new chart for the PDF toolbox (1.0.0+up2.8.7) ... BentoPDF computes entirely in the visitor's browser; the container only serves static files through nginx. The chart is therefore close to cyberchef - same nginx-unprivileged base, uid 101, port 8080, probes on "/" - with four differences that shaped the design. Runtime config.json. The one setting reachable at runtime is the tool list. It is a static file in the middle of the web root, so it is mounted by subPath: a directory mount would hide the whole application. subPath mounts are never refreshed by the kubelet, which makes the checksum/config annotation (#82) load-bearing rather than decorative. bentopdf.config is passed through verbatim, like searxng's settings, so a key upstream adds tomorrow is a values change and not a chart change. Three env switches that would kill the pod. PORT, DISABLE_IPV6 and ROBOTS_NOINDEX are implemented as "sed -i" against files in the image, run under "set -e" in /docker-entrypoint.d/, and the base image's entrypoint aborts when one of them fails. With readOnlyRootFilesystem: true the pod therefore never starts instead of ignoring the switch - measured in k3d as CrashLoopBackOff, exit 1, "sed: can't create temp file '/etc/nginx/nginx.confXXXXXX': Read-only file system". None of the three is offered as a first-class value; values.yaml names the failure picture and the escape hatch (env block plus readOnlyRootFilesystem: false). Writable paths were measured, not copied from the upstream chart. /etc/nginx/tmp holds the pid file and /var/cache/nginx is where nginx creates its temp directories at startup - without it the master aborts with 'mkdir() "/var/cache/nginx/client_temp" failed'. /var/run is deliberately not mounted: the running pod proves it is unnecessary. Everything else about BentoPDF is a build-time argument and out of reach for any chart; values.yaml says so explicitly rather than leaving it to be discovered. Two accepted consequences are named there too: some tools fetch WASM modules from a public CDN at runtime, and the served pages carry a canonical link to the vendor's site. Fixes #174	2026-08-28 18:22:30 +02:00
jklein	46942db53a	searxng: new chart (1.0.0+up2026.8.22.9fea41204) ... SearXNG as a stateless Deployment plus a settings ConfigMap, with the four CI steps a new chart needs: publish workflow, change-app-version choice list, ci/searxng/ fixtures and a renovate.json5 block. Three points where the chart is not a cyberchef with another name: * The image entrypoint writes settings.yml into /etc/searxng only when the file is missing. The chart always mounts one by subPath, so the copy and the random-secret sed never run and the container needs no write access there - which is what allows readOnlyRootFilesystem: true. * The signing key is a required OnePasswordItem, not a ConfigMap key. It signs the settings cookie and the image-proxy URLs, and the entrypoint's self-generating fallback cannot fire here, so without it the instance would run on the literal "ultrasecretkey" - which webapp.py refuses with exit 1. * All three probes use /healthz, the only path the bot detection lets through unconditionally. Measured: with the limiter active, "/" answers 429 while /healthz still answers 200. ingress.domain is read a second time outside the Ingress template, for SEARXNG_BASE_URL, and carries its own required() there - so it stays mandatory with the Ingress switched off. The Renovate versioning regex deviates from the plan on the issue and matches the commit hash WITHOUT capturing it. Renovate parses a "build" group with Number.parseInt, so a hash becomes the digits leading it; measured on renovate 41.173.1 and 44.48.0, the planned form reports an image pushed earlier the same day as an update to a newer one. Reasoning in the block and in README.	2026-08-27 21:09:59 +02:00
jklein	f5da9ce126	renovate: exclude the two legacy qbittorrent tags ... linuxserver/qbittorrent still carries 14.3.9 and 20.04.1 from earlier tagging schemes. Docker versioning sorts both above every real release, so Renovate offers them as major updates - PRs #152 and #153 are exactly those, and they would have to be closed by hand again after every lookup. They cost more than the noise. Renovate fills the major bucket once, so while a stray occupies it the genuine major is never offered at all: measured from currentValue 4.6.4, the unconstrained lookup returns 4.6.7 and 20.04.1, and never mentions 5.2.3. Both are excluded by name. A bound such as "<10" would reject a genuine major sooner or later, whereas two finished artifacts cannot grow and so cannot mask a release that does not exist yet. A shape-based filter was tried first and measured out: requiring a non-padded minor drops 20.04.1 and simply promotes 14.3.9 into its place. Verified with renovate 44.41.0 (dry-run=lookup) against the live registry: currentValue 5.2.1 -> [5.2.3 (patch)], both strays gone currentValue 4.6.4 -> [4.6.7 (patch), 5.2.3 (major)] The second fixture is the guard the nginx rule taught us to run - it proves the filter does not silently empty the update list. A full run over the real repository with the real config confirms it in place: qbittorrent offers 5.2.3 only, nginx is unchanged, and no docker dependency carries a skipReason or a warning.	2026-08-24 15:45:57 +02:00
jklein	af5f9ed79b	Pin gluetun in values too, so Renovate proposes it there ... The chart bundles nine independently versioned upstreams, and eight of them were already pinned in values.yaml while only gluetun took its tag from appVersion. That split had no upside: it made gluetun the one image Renovate could not reach through the built-in helm-values manager, and it implied a "main app" the stack does not have. gluetun now carries gluetun.image.repository/tag like every other image, and the StatefulSet renders it from there. No tag comes from appVersion any more. Renovate picks all nine up through helm-values - the manager the repo already relies on for sidecar images - and ci/renovate-bump-chart.sh bumps the chart version with each update. Consequences, all documented where they bite: - renovate.json5 deliberately gets no app-version block for this chart. One would either duplicate the helm-values updates or rewrite an appVersion that selects no image. The absence is commented so it does not read as an oversight. - freesailarr leaves the change-app-version.yml choice list. That workflow rewrites appVersion and republishes, which for this chart would change no deployed image at all. - appVersion becomes a hand-maintained marker for the gluetun line. Since renovate-bump-chart.sh bumps the patch level on an unchanged appVersion, a gluetun update has to be paired with a hand edit of appVersion, or the +up suffix stops describing what the chart deploys. Noted in Chart.yaml, values.yaml and README.	2026-08-24 15:01:34 +02:00
jklein	0d62c0d6ce	renovate: name the nginx alpine check in #84 accurately ... The rationale called the alpine switch a proposal from the issue text. A later comment on #84 commissions it as a check with a defined scope (nginx.conf compatibility, port 8080, uid 101, /tmp redirection) to be done alongside the seccompProfile PR for this chart. The outcome is open, the check is not - the constraint has to survive either way.	2026-08-24 12:18:29 +02:00
jklein	2d03ba8a7c	renovate: let the nginx constraint survive a variant tag ... The anchored form rejected any tag with a suffix. Docker versioning only offers candidates carrying the current tag's suffix, so the day the delegation sidecar moves to a slimmer base image (#84, still open) every candidate would fail the filter and nginx would stop receiving updates - without an error, a warning, or a red dashboard. Verified against currentValue 1.28.0-alpine: anchored form returns "updates": [] and "warnings": [], the suffix-tolerant form proposes 1.30.4-alpine and still refuses the newer 1.31.x mainline.	2026-08-24 12:15:01 +02:00
jklein	0908785b10	renovate: keep the delegation nginx on stable branches ... nginx numbers its release branches by minor: even is stable, odd is mainline. PR #139 proposed 1.30.4 -> 1.31.4, which would have moved the Synapse delegation sidecar onto mainline without that ever being a decision. allowedVersions now permits even minors only; patch updates inside the stable branch still come through and still automerge.	2026-08-24 12:09:26 +02:00
jklein	2e0e37d838	renovate: automerge minor updates, make the install-test blocking ... The two open Renovate PRs (#138 alpine 3.22 -> 3.24, #139 nginx 1.30.4 -> 1.31.4) never automerged because both are minor updates while the rule only covered patch and digest. Sidecar images barely move in patch steps, so patch-only would practically never fire. Automerging a chart update publishes it, so the install-test can no longer report failures without blocking: continue-on-error is gone and issue #22's stabilization phase ends here. Majors stay manual.	2026-08-24 12:01:08 +02:00
jklein	6b25d082a7	renovate: chart-aware config with an automatic version bump ... Renovate only ever rewrites appVersion or an image tag, so every PR it opened against a chart directory failed the build-chart version check (#138, #139). ci/renovate-bump-chart.sh recomputes version: <semver>+up<appVersion> as a postUpgradeTasks hook: chart major when the app major moves, chart patch otherwise. Each chart renders its main image as <repo>:{{ .Chart.AppVersion }}, so repository and version live in different files and Renovate cannot join them. The mapping is one customManager per chart in renovate.json5, deliberately not a comment inside each Chart.yaml - that would touch all 20 chart directories and force 20 publishes for a comment change. Patch and digest updates automerge after a 3-day minimumReleaseAge once the pipeline is green; majors arrive one line at a time to match the stepwise app-major procedure. ci/** stays excluded: the install-test fixtures pin throwaway infrastructure to major lines on purpose.	2026-08-24 11:42:43 +02:00